WANTED 395xp parts

[Jusgunn3]

Starting a build on a 395xp and I need most everything. I have case halves, starter recoil, and handle so far. Need everything else so let me know what you have. Would prefer OEM parts if you have them, thanks!

 

[Woodwackr]

Starting a build on a 395xp and I need most everything. I have case halves, starter recoil, and handle so far. Need everything else so let me know what you have. Would prefer OEM parts if you have them, thanks!

I have a 390 piston. Hydrid?

 

[trooney]

I think I've got a flywheel and carb housing. Maybe a crankshaft too.

 

[huskihl]

You need a lot of parts. You could probably buy a decent used 395 for less than you’ll have buying the parts separately.
But I’ve done it. It sprawls out the process and makes it easier to spend little bits at a time

 

[Woodwackr]

You need a lot of parts. You could probably buy a decent used 395 for less than you’ll have buying the parts separately.
But I’ve done it. It’s sprawls out the process and makes it easier to spend little bits at a time

That makes the most sense. These saws are all over the place with plenty of dead ones to pick from.

 

[Jusgunn3]

Might have a parts saw lined up, waiting on a reply

 

[JIMG]

I have a new stens branded AM P&C you can have for $10 + shipping. I think it's hyway.

 

[Sloughfoot]

Was looking for other Husky parts and found this.

GENUINE OEM CYLINDER KIT 503993903 HUSQVARNA 395XP | eBay

HUSQVARNA Part # 503993903. 395 EPA (2007-01) Chainsaw. (Don't be tricked by shady wording ). 395 (2005-05) Chainsaw. 395 XP (2010-06) Epa Chain Saw. 395 XP (2016-10) Epa Chain Saw. 395 XP (2003-10) Epa Chain Saw.

www.ebay.com

Genuine Husqvarna 395XP / 395 XP Jonsered 2095 Chainsaw Crankshaft 537 09 05-71 | eBay

What we have here is an OEM crank for Husqvarna 395 chainsaws. In good used, working condition. No cracks or breaks. No up & down play in the big end, no scoring in the small end.

www.ebay.com

 

[Woodslasher]

@Pdotsaws hooked me up with some 395 stuff awhile back, great prices and amazingly fast shipping times from the great white north. I seem to have heard something about canuck postal service issues recently, though.

 

[farminkarman]

I have a jug if you need one.

 

[Jusgunn3]

I have a parts saw coming in that is supposed to have a good top end but I will find out!