201tc mtronic running rougher than a bears arse

[sean silverwood]

as title suggests
got a 201tc mtronic in thats running *s-worde.
it seems to be flooding.
erratic idle and cuts out if you blip the throttle.
then only starts on WOT
any known issues with this piece of crap.
the saws just out of warranty.
it had running issues a few weeks ago and i did a full service and reset the module using
that tick over for 60 seconds procedure.
anyway any help would be appreciated and i appologise for the language.

 

[Lone Wolf]

as title suggests
got a 201tc mtronic in thats running *s-worde.
it seems to be flooding.
erratic idle and cuts out if you blip the throttle.
then only starts on WOT
any known issues with this piece of crap.
the saws just out of warranty.
it had running issues a few weeks ago and i did a full service and reset the module using
that tick over for 60 seconds procedure.
anyway any help would be appreciated and i appologise for the language.

Subbed.

 

[backhoelover]

go and get you a solenoid and throw it on and see what it does. it the little black thing on the carb. newer ones a a security torx 8.

 

[backhoelover]

other tb

 

[backhoelover]

if you cant get it running ill be more than happy to look at it for you just pay for shipping and parts no labor cost

 

[backhoelover]

sorry its a t10

 

[Stackowood]

Thanks backhoelover for posting the bulletins.

 

[merc_man]

Running rougher then a bears
@$$. Never heard that before. Gotta add that to my vocabulary.[emoji39]

Sent from my SM-J320W8 using Tapatalk

 

[CR888]

In your 'full service'.....did you clean the spark arrestor?

 

[sean silverwood]

In your 'full service'.....did you clean the spark arrestor?

UK based. we dont have them. saw had-
fuel filter
air filter
spark plug
all oem used.

i also noticed that someone has previously attempted to advance the timing and made a bit of a *f-wordery.
the flywheel now seems to wobble a bit. think maybe this could be the problem? what yall think??
its been slapping about a bit/

 

[CR888]

Tighten down the flywheel. I'd also check the choke is opening/closing as it should.