HUSQVARNA 136 bah info

[Wolverine]

I have a 136 here, and I thought I had a bah for it.


Fits on the studs but has no hole for oil. Anyone know if I can simply drill my own on this one? When I searched the interweb, this number comes up as a match for the saw.

 

[bagpipingtrucker]

Drill baby drill!

Homelite collector in training [emoji879]

 

[bagpipingtrucker]

I usually use the guide plate to match up where oil holes go.

Homelite collector in training [emoji879]

 

[Czed]

Mark with sharpie and drill.
GB bar's from left coast i bought some universal bar's
With no oil hole and drilled them.

 

[Wolverine]

I've used grease in the past to create a witness area. Drill it will be. Tnx.

 

[SOS Ridgerider]

I thought the 136 had an A041 mount that oils through the adjuster hole. There is no groove cut in the hole there?

 

[Wolverine]

I thought the 136 had an A041 mount that oils through the adjuster hole. There is no groove cut in the hole there?

Let me go have a look Sondre. That thought never crossed my mind.

 

[Wolverine]

So I’ll have to fire the saw up and see where it oils. I’ve found a bunch of bars that say 136 and the majority have an oil hole.


My bah has the holes at the mount slot, which could be JB’d. Good thing I didn’t drill yet. Thanks @SOS Ridgerider

 

[SOS Ridgerider]

Does the oiler slot on the saw not line up with the upper adjuster hole on the bar when mounted?

 

[SOS Ridgerider]

Your oiler slot and adjuster hole, with the groove cut in it, should line up and you should get the oil to the chain through there. I have a 142 here with the same setup.

 

[Wolverine]

Oh, ffs. I've never dealt w/ this set-up. Thanks for enlightening me. Maybe I do have the right bah!

 

[SOS Ridgerider]

Oh, ffs. I've never dealt w/ this set-up. Thanks for enlightening me. Maybe I do have the right bah!

You’re welcome. Can’t say I’ve ever felt that way myself

 

[Wolverine]

Slot and hole do not line up, I’m drilling after all. At least I learned something outta the deal.