038 muffler

[WooHoo223]

Yes I do see I am running a bit rich, earlier in the week I felt the life give out of a 357 in my hands as it leaned out, call me gun shy.

 

[Jughead]

on the inner baffle i just drill the biggest hole i can in the center.start small and drill bigger with a step bit.

 

[Al Smith]

Working on the exhaust side will produce more gains than any thing else .With a 2 cycle and differential pressures you have to work backwards .If it can't get out it can't get in .

Where I'm at fire is no problem as it would take a napalm drop to set these hardwoods ablaze .No screens .Total area of the muffler holes about 80-85 percent of the exhaust port much over that only produces noise not power .

 

[Big_6]

Those are good you can make them louder but it wont gain much if any they did those right from the factory.

What's factory? Add more bananas!

 

[Funky sawman]

The 038mag 2 I owned and sold 3 times and just bought back was a factory triple port. Two ports on chain side, and one on starter side. Only thing I did is remove that internal baffle. Now it barks real nice

 

[Big_6]

Just letting people know the 3 port is out there. Some people never seen one


Sent from my iPhone using Tapatalk

Brazilians

 

[Funky sawman]

Mine was a west german model