036 port/build

[BuxtonSaws]

Porting a older 036

Sent from my Pixel 4a using Tapatalk

 

[BuxtonSaws]

Done a handful of these but was in the photo mood today

Sent from my Pixel 4a using Tapatalk

 

[BuxtonSaws]

.040 from the band squish set to .024

Sent from my Pixel 4a using Tapatalk

 

[BuxtonSaws]

After machine work I was at 110 130 80 ... I went with 102 120 80 and some bridges. Hopefully it takes. Been awhile since I've done one.

Sent from my Pixel 4a using Tapatalk

 

[huskyboy]

Going for rpms?

 

[BuxtonSaws]

Going for rpms?

To a extent.. I like a little extra in these. Always feel a lil sluggy compared to the newer quad 60cc saws. To me at least.

Sent from my Pixel 4a using Tapatalk

 

[Red97]

Done yet?

 

[TreeLife]

Porting a older 036

Sent from my Pixel 4a using Tapatalk

Seen a few of your saws in action on the interwebz, some good runners for sure.

 

[BuxtonSaws]

Done yet?

She's done.. I'll share some videos later this week.

Sent from my Pixel 4a using Tapatalk

 

[BuxtonSaws]

Seen a few of your saws in action on the interwebz, some good runners for sure.

Thanks! They ain't no race winners. But I like to think most are respectable work saws. Still try to learn everyday.. this forum is a great resource.

Sent from my Pixel 4a using Tapatalk

 

[Ketchup]

Nice shop. Do you do anything to overcome the air intake problems?

 

[BuxtonSaws]

Nice shop. Do you do anything to overcome the air intake problems?

Not on somthing like this... I'm just shooting for a nice pulling firewood saw. Only mods not pictured are a 6 degree timing bump and a healthy muff mod.

Sent from my Pixel 4a using Tapatalk

 

[huskyboy]

Not on somthing like this... I'm just shooting for a nice pulling firewood saw. Only mods not pictured are a 6 degree timing bump and a healthy muff mod.

Sent from my Pixel 4a using Tapatalk

What’s stock ignition timing on a saw like this? Just curious.

 

[BuxtonSaws]

What’s stock ignition timing on a saw like this? Just curious.

To be honest I'm not sure of the exact curve on one. I'm sure someone around here knows. I do know they are not hot like a 361. Definitely a saw that benifiets from a bump. (Trial and error) I've only done 4 or 5 of these and never dug that deep... Just going off sound and feeling.

Sent from my Pixel 4a using Tapatalk

 

[huskyboy]

To be honest I'm not sure of the exact curve on one. I'm sure someone around here knows. I do know they are not hot like a 361. Definitely a saw that benifiets from a bump. (Trial and error) I've only done 4 or 5 of these and never dug that deep... Just going off sound and feeling.

Sent from my Pixel 4a using Tapatalk

Makes sense to me sir

 

[BuxtonSaws]

Kind of a junk video I had a good one but my phone over heated https://youtube.com/shorts/_ngMv5BVTXM?feature=share

Sent from my Pixel 4a using Tapatalk

 

[Maintenance Chief]

Im just starting to explore timing advanced, (I definitely know when there is too much) .
I have a good running 034S and wondered if a timing bump would help? Thanks for the heads up.

 

[BuxtonSaws]

Im just starting to explore timing advanced, (I definitely know when there is too much) .
I have a good running 034S and wondered if a timing bump would help? Thanks for the heads up.

034 will like it.. try starting around 5 degrees or .020 .. I know timing curves on some saws but most I just do by sound and feel. You'll start to hear it in time.

Sent from my Pixel 4a using Tapatalk