ZERO's latest activity
-
Not sure what does it but that’s how they are. Maybe stack-up of different parts adding to the overall depth? I don’t know. Lay it on... -
It appears that this issue is being way over analyzed. I have never used either of these saws. In the first few minutes of the video...
-
You mention the pro use of that speed cut nano. Are they using the 540 battery saw or other battery saw or gas saw? TIA.
-
Thank God someone else said it.
-
It sounds like Gordy at West Coast Saws needs to design a set of three-points for this...
-
The spikes are my least favorite thing about the saw. The positioning and the spike itself are garbage. Looking forward to an upgrade.
-
Need sunglases! Philbert
-
Mike finally got a break from all of the cold weather emergencies and got started on installing the "boiler" today. This unit will...
-
A few weeks ago. Yesterday. May be the oldest Husqvarna I have in the display for now. Mark
-
Make sure the purge bubble is hooked up correctly. The short side of the purge bubble goes to the S shaped hose. I’d replace the fuel...
-
Do you have a pressure/vacuum tester?
-
I have a 2019 572 on the bench. I was told the saw would start but not stay running. In fact the saw will not run unless you pour a...
-
Now I feel bad, I only have 12. 😎
-
The only problem is not having enough time to run them all...but you have to remember, 1 is none and 2 is one, so it is always good to...
-
All run or in all states of parts and repair? I easily have over 100 if you include runners and ones that could be wirh parts saws ect...
