High Quality Chainsaw Bars Husqvarna Toys Hockfire Saws

ZERO's latest activity

  • ZERO
    ZERO reacted to AVB's post in the thread Who makes this chain with Like Like.
    Hopefully you two versions of this Poulan clutch tool. One has the pins slightly farther apart which why I had order the second one.
  • ZERO
    ZERO reacted to Wilhelm's post in the thread Who makes this chain with Like Like.
    Most screnches are just preased round seamed tubing, soft. A socket is a better workpiece choice. I chose and really like the...
  • ZERO
    ZERO reacted to AVB's post in the thread Who makes this chain with Like Like.
    Very nice beefy tools. I just wish the customers would learn to use the proper tools and the correct hardware as that would eliminate a...
  • ZERO
    ZERO reacted to Wilhelm's post in the thread Who makes this chain with Like Like.
    You still end up with a radius and You end up weakening the socket. Well said! Making my custom 13mm screnches I had no choice but to...
  • ZERO
    ZERO reacted to AVB's post in the thread Who makes this chain with Like Like.
    Well which would you rather do? Replace an easily replaced bit while a taking a few minutes on rare occasions knocking off the corners...
  • ZERO
    ZERO reacted to legdelimber's post in the thread Who makes this chain with Like Like.
    I'd be tempted to grab a rotary tool and a small diamond bit, and grind a very slight clearance in the corners of the pocket where the...
  • ZERO
    ZERO reacted to heimannm's post in the thread Vintage Chainsaw Museum with Like Like.
    Vinyl laminate flooring in the hallway and middle third of the building. I was not satisfied with the way the "grind & seal" concrete...
  • ZERO
    ZERO reacted to echo510s's post in the thread 400.1 first impression with Like Like.
    Yep in production work I use a 60cc after a top handle about half the time, depending on the job. If the drop zone is big enough I’ll...
  • ZERO
    ZERO reacted to ferris's post in the thread 400.1 first impression with Like Like.
    Yes correct, but definitely stronger then 361/362
  • ZERO
    ZERO reacted to HumBurner's post in the thread 084 value with Like Like.
    No double tie-in? I'm worried you might hurt your spinal cord if you happen to hit your line.
  • ZERO
    ZERO reacted to qurotro's post in the thread 084 value with Like Like.
    This thread is getting hilarious..
  • ZERO
    ZERO reacted to drf256's post in the thread 400 CM Build with Like Like.
  • ZERO
    ZERO reacted to drf256's post in the thread 400 CM Build with Like Like.
    Here is the muffler baffle. I still feel it helps to stop a short circuit out of the deflector. Any saw I’ve done where u can check...
  • ZERO
    ZERO reacted to drf256's post in the thread 400 CM Build with Like Like.
    I relieved the AF holder so that any spitback could get sucked into the strato’s. Seems to make a difference on the Dyno I’ve been...
  • ZERO
    ZERO reacted to sawmikaze's post in the thread 500i E clip removal with Like Like.
    Patience - sometimes they pop off easy, sometimes I use every swear word and racial term I can come up with and throw my screwdriver.
Show older items
Top