ZERO's latest activity
-
You can swap the covers on the 026 carbs for ones that don't have the impulse and smart carb filter reference, or cut them off and plug... -
Since it's been mentioned I'm in the process restoring two 49 cc Partners .500 and 5000 plus which from what I see are the same saws...
-
I have a Partner 500 with a ported Husqvarna closed port 55 cylinder, I used the 55 carb but bored it out and drilled the main jet. It's...
-
A little more on this .At least 12 or more years ago I ran a 5000 Plus at the saw races at Chardon Ohio . It was a gasser ..My bud Kevin...
-
In my case the plan is getting both running .The second coil I should get today for the 500 ,the 5000 already does run .Then chain them...
-
I have now experimented with some carbs and found the WT194 as the best bolt-on carb. The saw has plenty of power and will run with my...
-
As long as everything looks like it will work why not?? I'm not familiar with the 5000 but the 026 carb does not have a choke plate...
-
Have a WT426 carb from a 026 I wonder if I can use on my Partner 5000plus.? There are two issues though, the 026 carb has a "snorkle"...
-
I sold my smaller Makita to a fellow who loves it. He learned I had one through the grapevine because I never listed it. It's only flaw...
-
Yea, they forced the farmers in denmark to feed their cows some factory made meal, so they wouldn't burp, they aint burping now, dying...
-
^^^ This ^^^ Philbert
-
Shareholders I would imagine, got all woke and save the planet.
-
I think this is accurate.
-
ZERO reacted to hacskaroly's post in the thread Difference between Husky 435 and 440 chassis with
Like.
I believe the only difference is the piston and cylinder (bore size) between the two. Looks like you should be able to just put a 440... -
ZERO reacted to Ford3000's post in the thread Difference between Husky 435 and 440 chassis with Like.
Any one know the answer to my above post.