ZERO's latest activity
-
ZERO reacted to Ford3000's post in the thread Difference between Husky 435 and 440 chassis with
Like.
Hello to all. Can anyone tell me if the Husqvarna 435 and Husqvarna 440 are built on different sized chassis. And indeed what is the... -
Sounds good. Thanks guys
-
I’ll second this. I have run 550’s and 545’s (stuffed vs. not) and 555’s and 562’s. I much prefer to run the saws with the stuffers...
-
I would leave them in personally. Use a good mix oil at 32:1 and your bearings will be fine
-
I have heard of people adding stuffers to increase compression, I would imagine if it originally had it and the stuffers were removed...
-
https://opeforum.com/search/213085/?q=Without+stuffers&o=relevance
-
I'm going to be building a 576xp soon. This will be the first saw I worked on with crank stuffers. The question I have is, has anyone...
-
Good catch! I'll be careful. I did a little digging through my repair manuals for this series and found the following: Oil tank...
-
There is no HO option for an 044/440. It’s the HO oiler parts from a 460/461, which have a considerably larger oil tank. It definitely...
-
This mod with the new 1.0mm stroke shouldn't be any worse than the stock HO pump which I wouldn't think would be designed to allow run...
-
I have lots of old stuff Used to gold mine but the goberment took the mine and we got the shaft. Made a park out of the area. So got...
-
You're welcome! We sent it on after it was here. 😆
-
Replaced a u-joint on my Ranger . It had been so long since I did this task I forgotten what a miserable job it was . I used a GMB...
-
MINUS SEVENTEEN F!!!?
-
0 at night and 5°C during the day and it's supposedly winter 😉👍