ZERO's latest activity
-
Started tearing the vise down on my basement bench. Need projects while I’m waiting on the wood stove. Don’t mind the mess. Eight months... -
Busy day at the museum today. Line crew was relocating some phone/data lines in the alley, garage door was installed, HVAC crew were...
-
Finished up a sonic clean and carb kit this afternoon on the 667. Yep it runs just a bit better. Will need to do some additional tuning...
-
Is your Stainless NONMAGNETIC? Did it accumulate rust? I have a fair size 120 VAC to 12VDC forklift battery charge I need to check out...
-
GOOD reading. Thank you for your efforts I have gleaned quite a few ideas that relate to my future project.
-
I have a 45 gallon plastic barrel where I have hung 4 strips of stainless steel I cut from a fridge door a old style constant amp...
-
Why, 😎
-
This might survive that…
-
I love love love the 372xpw. Today I found one like brand new. Bet it doesn't have 3 tanks through it. Came with 2. 28inch sugi light...
-
https://opeforum.com/threads/clean-chain-anyone.26111/#post-1349151 https://opeforum.com/threads/best-penetrating-oil.26304/#post-1356980
-
Sabre saw Metabo PS E 0525 for $8, damaged cable, the equipment is 37 years old 🤠👍 I added some grease and soaked the felt in oil
-
I didn't find one. Plenty on the internet though: https://www.iforgeiron.com/topic/68445-vice-restoration-w-electrolysis/...
-
I made a comment, got 3 back. Guess I Have some reading to do. I have a RUSTY 52" circle saw blade to experiment on. Any threads...
-
Ammonium nitrate 😎👍
-
My cannon roller nose takes a 108,i it’s 40” overall. I hate .404 skip round file chisel, square ground skip is fine. The round file...
