ZERO's latest activity
-
Saturday....... -
Tore it all the way down and cleaned everything up, going to reassemble it with a 353 cylinder and a dukes coated piston . It had the...
-
What did you do to the 350?
-
The 440 is a local guys that I told him I would take a look at. The 350 is mine 🙂
-
They yours?
-
Got a 440 mag on the bench and a husky 350 going back together. Guy said the 440 was hard to get started and the recoil was having...
-
Mark
-
Carburetors. A local shop was closing down and they were selling the carburetors they had collected over the years. I ended up with 44...
-
This one with the 32” bar
-
This is the cp
-
The cp we added the boost port, I lifted the exhaust port, and did some minor blending. Added the modded 795 stuffer and 5° flywheel...
-
Was this the CP block where you epoxied the intake and transfers, ported the intake manifold with the 5 degree flywheel?
-
Thank you Jacob. My wrist pin is 1/2" with the bearings in the piston. I was just reading some of your posts comparing the different...
-
Hey Jeff - Welcome! Chuck (Strockerace) has boost port covers here: https://www.ebay.com/itm/267418117346 I've bought a lot of stuff...
-
Bigmac - thanks for the info, I talked to Terry today about having some machine work done. Mark - Thanks for looking, those two could...
