ZERO's latest activity
-
-
primary 0.4-2 secondary 6-10 is my guess. Is you air gap correct 0.3mm? With a firm pull and getting a nice spark, is what I look for.
-
I do not know when many folks pass away. My father used to watch the obituaries in the paper. Sometimes he would tell me and sometimes...
-
It's the fully adjustable wt-194. I and the guy who owns the saw can both tune. So looking at the non pto side you take off the right...
-
First off don’t do anything to muffler till you make sure the carb is a fully adjustable one. If it doesn’t have a wt-194 with both high...
-
1996 Bandit 250XP. In WNC you can't find anything used worth owning since the Hurricane last year. Drove to Iowa to get it and still...
-
ZERO reacted to lehman live edge slab's post in the thread Looking at upgrading and would welcome advice/opinions. with
Like.
The light 04 is a laminated bar and slightly lighter per length than the old rollomatic es they replaced. The 261 has no issues with a... -
ZERO reacted to tallgrass_coyote's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
I feel like if I go big I'm just buyiing a 261 and taping 500 to the handle. So I'm going for it. Now let's talk bars and chains...
-
ZERO reacted to Jusgunn3's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
Id go for the 400c if you’re a Stihl guy, plenty of power and not much heavier to carry around. Run a 24” for reach and you can handle...
-
ZERO reacted to IffykidMn's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
The way I took your first post it sounded more like the average was 24" not 6-8" 261 with carb of choice will get it done.
-
ZERO reacted to jeffkrib's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
Steep rocky ground, cutting mainly small stuff, the 261 is ideal. If you are mainly cutting 24" stuff then 60cc would be the go. You...
-
ZERO reacted to Bill G's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
The 261is the best choice for the job.
-
ZERO reacted to lehman live edge slab's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
If majority are 6-10” cedars the 261 is plenty fine and a bigger saw won’t even seem that much faster honestly. Even a 24”+ won’t make...
-
ZERO reacted to tallgrass_coyote's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
Thanks for replying. I definitely thought about going bigger, but I need to prioritize maneuverability and stamina. Are thinking not...
-
ZERO reacted to lehman live edge slab's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
You’ll be just fine on 24” cedars with an ms 261c and a 20” bar. Get one with a .050 light 04 20” and run the narrow kerf rs pro .325 on...