Woodslasher's latest activity
-
Do they have this specially ergonomic detachable starter rope? -
Woodslasher reacted to singinwoodwackr's post in the thread FOUND IT Ported 2511t- closed with
Haha.
Just don’t tell Gavin you do this 🤣 -
Make sure the purge bubble is hooked up correctly. The short side of the purge bubble goes to the S shaped hose. I’d replace the fuel...
-
I have herbicide totes of them...... I guess I need a 15 step program cause 12 is not enough
-
Thank God someone else said it.
-
It sounds like Gordy at West Coast Saws needs to design a set of three-points for this...
-
The spikes are my least favorite thing about the saw. The positioning and the spike itself are garbage. Looking forward to an upgrade.
-
That's it, Humpty and Dumpty are back together again...
-
Drilled a hole slightly larger than the fine wire to use for a safety on the right AV.
-
I used a star ball driver from Echo on the attachment screws. Which is about as much as can be said for Echoes and 90cc class saws in...
-
We did the tape trick on another project recently, but with that deep pocket in the SXL even tape would have been rather challenging. Mark
-
Solution for replacement of old busted HD filters on P series saws.
-
You got a recommendation from Kevin, but we won't hold that against you. Welcome anyway!
-
Don't suck him in to the Women's Auxiliary yet.
-
Welcome to the forum where everybody is an expert!
