Sloughfoot's latest activity
-
-
-
Sloughfoot reacted to Wilhelm's post in the thread HELP! How to know when you have too much hook with
Like.
First picture (0914) is what You should aim for, second picture (0916) You are a bit too high. The guide still doesn't seem to sit... -
Scott’s method works well, but I personally only use it on some Husky models that don’t have any type of stop in the case for bearing...
-
Sloughfoot reacted to hacskaroly's post in the thread MCCULLOCH The official McCulloch thread with Like.
The 1-41 chainsaw is 80cc, power head only = 19.5 lbs
-
Sloughfoot reacted to Woodslasher's post in the thread MCCULLOCH The official McCulloch thread with Like.
80cc, I dunno the hp rating.
-
Sloughfoot replied to the thread HELP! How to know when you have too much hook.How's it cut?
-
Too many heifers this year for some reason. Keeping extra mineral lick tubs out to see if it makes a difference for next year. Old...
-
Most of you gents won’t find this amusing BUT @Hinerman will get a good chuckle out of it. Lol
-
Sloughfoot replied to the thread MCCULLOCH The official McCulloch thread.What's the displacement and h.p. rating on that beast? My Honda with a GX35 is 36 c.c. and a whopping 1.3 h.p.
-
Sloughfoot reacted to heimannm's post in the thread MCCULLOCH The official McCulloch thread with Like.
Requires two workbenches.
-
Sloughfoot reacted to Woodslasher's post in the thread 372 sputters when tipped, passes spray test with Like.
Out of 5 or more 372-chassis saws I've stripped only 1 had an o-ring present and none of the ones without it exhibited any sort of...
-
Sloughfoot reacted to EFSM's post in the thread 372 sputters when tipped, passes spray test with Like.
Yes the seal will be leaking, but chain tension will have a lot more to do with crankshaft position than saw orientation will. They do...
-
Sloughfoot reacted to huskihl's post in the thread 372 sputters when tipped, passes spray test with Like.
Something else I’ve learned along the way. If your carb screws are normally at one and one, turn the H out 2 turns. Hold the saw wide...
-
Sloughfoot reacted to huskihl's post in the thread 372 sputters when tipped, passes spray test with Like.
026 failing the tip test is more likely fuel pooling in the intake and in the lower transfer ports. L screw needs to be leaned out a...