singinwoodwackr's latest activity
-
SWill be a fun project with my fil over Thanksgiving while the hens cluck.
-
SKeep going. Have to to remove ALL of the transfer. You're gonna be at it a while with 500 grit. After it's gone hit the bore with red...
-
SKeep sanding if the spot gets bigger it's junk if it cleans up more might be ok
-
Ssinginwoodwackr replied to the thread Husky 350.Use 120g Emory till it’s gone. Then, go back over the entire interior with 220 and 320. 500g is a complete waste of time.
-
SI just saw these for the first time last week. It's definitely intriguing. I've always wanted to try square ground chain, but not with...
-
Ssinginwoodwackr reacted to heimannm's post in the thread STIHL The Official Stihl Chainsaws Thread with
Like.
I did receive the kit from Saw Again (see post 4,855) , put the MS210C back together today. I had to use the pan from the original... -
SCleaned up a White Oak that had rot at the base for our neighbors just north of us. They have some HUGE trees there because the...
-
Ssinginwoodwackr replied to the thread Trees you've cut.A couple Cottonwoods for a friend. 40" and 25"
-
-
SMy porting setup consists of PayPal, Pirate Ship, and a short list of names. Call me lazy.
-
Ssinginwoodwackr reacted to bogieboy's post in the thread STIHL The Official Stihl Chainsaws Thread with
Wow.
This is the first startup tank after warming up.... for having about .050 squish to minimize (got it down to about .010") free port at... -
Ssinginwoodwackr reacted to lehman live edge slab's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
It’s got 10 thousandths squish only? Seems a bit tight compared to what lots of guys like at 18-20 on bigger saws but hopefully she runs...
-
Ssinginwoodwackr reacted to bogieboy's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
Its a combo of spring power and inertia... doesnt supprise me one bit... add in a hamfisted operator yanking it like a large saw and...
-
Ssinginwoodwackr replied to the thread WANTED Husqvarna 340/345/350 recoil & clutch cover.List the pt#s you need and I’ll check
-
Ssinginwoodwackr replied to the thread Husqvarna 2100 thread.Dogs have arrived... I'll start a thread in the FS section. https://opeforum.com/threads/husqvarna-2100-2101-285-298-1100-dogs.33496/
-
