singinwoodwackr's latest activity
-
SLong story short, this was my first 462 Kev ported and it cracked the intake side of the piston. I sent it to him to look over/fix and...
-
Susg, with cbn and use new angles as per the updated sheet . Its the primo grinder!
-
Ssinginwoodwackr reacted to 59billy's post in the thread WANTED Husqvarna 340/345/350 recoil & clutch cover with
Like.
I've got the side covers. A bit faded, but workable. -
Ssinginwoodwackr reacted to Sawponder's post in the thread WANTED Husqvarna 340/345/350 recoil & clutch cover with Like.
I thought i had a top cover, turns out the one i have is for 357/359. Ill take a top cover if you have one
-
Ssinginwoodwackr replied to the thread WANTED Husqvarna 340/345/350 recoil & clutch cover.I’ll check. I know I have top covers
-
SOur university built a shop for faculty to use for building equipment, which included a large vertical mill and a large lathe. I just...
-
Ssinginwoodwackr reacted to jacktheripper's post in the thread WANTED Complete-ish Stihl 064 or early short cased 066 with Like.
I’ll have to pull it to see. It’s the one that works with a universal coil, but I have the early style coil mount.
-
Ssinginwoodwackr replied to the thread So what did you buy today.330 Argon tank, with 600# of gas, $300.
-
Ssinginwoodwackr reacted to HumBurner's post in the thread The giveaway thread 20/21/22/23/24/25 with Like.
It's good stuff.
-
Ssinginwoodwackr replied to the thread Grinder Comparison Thread.Stihl USG here, as my main grinder. Bought from a member and once I got used to the thing going the opposite direction of the Oregon 520...
-
SThis thread is for members to compare different chain sharpening grinders: - what they like about specfic brands or models; - what...
-
Ssinginwoodwackr replied to the thread treemonkey stuff.These real-time vids give folks an idea of how labor intensive a professional port job is and why they ain’t cheap. Not to mention all...
-
Ssinginwoodwackr replied to the thread Square Jig.He makes the jigs himself. Not sure where he sources the wheels. I was referring to the Balistic Abrasives wheels..I have several and...
-
Ssinginwoodwackr replied to the thread WANTED Complete-ish Stihl 064 or early short cased 066.Which one? I have dual keyed 1201s and some 1204s Or, just break off the 3rd one to balance it out.