Shane¹'s latest activity
-
Splaceholder
-
SAround seven years ago I did a 350 build with no timing changes. I got rid of restriction in the cylinder riser, smoothed all of the...
-
SOh, I have a small pile of those, I think only one left with the stock dished piston. A couple of them are now 346s. Some of these are...
-
SThere is definitely value in taking some time to modify the stock 350 for a low-buck rig. If you have run a good ported 346xp, you can...
-
SMitch Weber stopped by today, he's in the process of reworking his shop and needed to get some stuff out of the way. I think I can...
-
SAdded some bling in the shop, Titan sign courtesy of Max. Mark
-
SAlright gang, sounds like there is enough interest in a thread on building husky 350's and their related plastic-cased variants (Husky...
-
SThe first problem area on these saws that I want to cover is the intake boot clamp. Husky for some reason decided to use an integral...
-
SThe next problem spot I want to address (only applies to saws with the cylinder riser) is the cylinder riser. On every single 350 I...
-
SThe last big problem area for these saws is the mufflers rattling themselves loose. On some saws this led to exhaust gases burning a...
-
SIf you are just interested in getting a 350 back up and running well in a stock configuration, addressing the three issues above should...
-
SThere are many different ways to do a muffler mod on these and results may vary depending on what other modifications you do along with...
-
Splaceholder
-
Splaceholder
-
Splaceholder
