SawAddictedFarmer's latest activity
-
SSawAddictedFarmer reacted to John Wargo's post in the thread Not so pros 4 new and without politics or drama with
Like.
Got called in to work again. Double time pay today -
SSawAddictedFarmer reacted to GCJenks204's post in the thread Not so pros 4 new and without politics or drama with Like.
Morning All!! The snow has stopped and of course the cold has set in. -11f to start but at least the sun is shining…
-
SSawAddictedFarmer reacted to Tor R's post in the thread Not so pros 4 new and without politics or drama with Like.
Good morning guys
-
SSawAddictedFarmer replied to the thread Not so pros 4 new and without politics or drama.Good morning! High of 40 here.
-
SSawAddictedFarmer reacted to ray benson's post in the thread Not so pros 4 new and without politics or drama with Like.
Good morning. 20°F/-7°C going up to 34°F/ 1°C.
-
SThe Autel ms906 is the way to go.
-
SShould I admit to having put muffler screws on a hot stove element, before screwing them in? Yes pliers and a couple of room temp...
-
SBuying the 564xpg wasn't my original plan, I wanted an upgraded 562, which came with the mark II. Since I'm a bit slow, the 564 was...
-
SSawAddictedFarmer reacted to LAWN BOY's post in the thread The official OPE daycare thread with Like.
I'm going to have a 2 car garage in addition to my little shed when I move in a few months to renting an apartment above the shop at...
-
SUse a Helicoil repair of your choice if in aluminum. You will end up with stronger threads than original.
-
SSawAddictedFarmer reacted to redneckhillbilly's post in the thread Not so pros 4 new and without politics or drama with Like.
rain with high elevation snow melt turned flooding, washed out 9 or so bridges county wide, than hurricane force winds gave me the best...
-
SSawAddictedFarmer reacted to legdelimber's post in the thread Husqvarna 564xp (g) fuel inject with Like.
Guys, I've never laid hands on the saw in question. I Probably never will. But please allow me a moment to grumble off some of why I...
-
SDon’t use aftermarket c clips if they are shaped like a G and the loose leg makes a tight 90° corner. If they are c shaped or have a...
-
SHomemade shop tool to pull an injector on my 518 Skidder. I was to lazy to pull the hood and the windshield and the muffler and the air...
-
SSawAddictedFarmer reacted to pavel408's post in the thread The mighty stihl 064 and early 066 with
Haha.
Corrected for you :)