Maintenance Chief's latest activity
-
Fubared MS362 getting some love. -
That serial number makes me wonder if it was some sort of "Experimental" model? At the same time, other Clinton saws I have seen also...
-
With the use of a heat gun putty knife, small screwdrivers, and a good measure of patience I was able to save the major gaskets. In...
-
Did some freehand ripping today. Easier than expected. Normal chain
-
HVAC were on site today preparing for the mini splits. Electricians were at work as well, here they are putting up lights in the...
-
-
Maintenance Chief reacted to heimannm's post in the thread POULAN The Official Poulan Thread with
Like.
Modified Mark provided me with the details on the seals (I had the right parts on hand), and Bufford Parrish had rings, the AF cover... -
Look at the roundabout in front of the EU building, they can't do it for years
-
-
I’ve never heard an mtron four stroke. They go right to the limiter… Lest we forget this is about emissions.
-
Maintenance Chief reacted to lehman live edge slab's post in the thread 400.1 first impression with Like.
Can’t be that lean because if it was it wouldn’t have made it through the tank.
-
Maintenance Chief reacted to t_fishaa's post in the thread SELLING Jonsered 510 sp and 535 classic parts saws with Like.
Definitely some good parts. Was gonna rebuild the 535 but never got around to it. Has scored cylinder and piston. The 510 sp cylinder...
-
Maintenance Chief reacted to heimannm's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
Carl - the OEM coils indeed have some advance built into the electronics, and will not produce a spark at lower speeds, I think...
-
All of our oil comes from Pennsylvania or Northeast Ohio.
-
Sounds like you haven't actually used the file yet and/or don't understand it's use... I'm assuming you have a 'double bevel' type file...