Junk Meister's latest activity
-
JJunk Meister replied to the thread HELP! Miller welder.I don't weld in the field no where close to the conditions Ya'LL have, but I started using 7018 by the 50# tin in the mid 70's . It...
-
JThere is a big difference between the atom arc rods and the lincoln excaliber-100 out of 100 welders will pick the excaliber rod Try...
-
JBecause there’s really no reason to buy the straight dc version anymore, the ac/dc stuff has been tweaked and runs well on most...
-
JJunk Meister reacted to cus_deluxe's post in the thread Crank bearing installation question with
Like.
im way too impatient to wait the minute or two the heat gun/torch takes. typically i would not heat the case enough, get bearing stuck... -
JYep, I keep a bottle of whatever 2t oil I've gotten with other saws purchases that I don't want to use for mix on the bench and pour a...
-
JPhilbert
-
JJunk Meister replied to the thread HELP! Miller welder.It is surprising how rare the 7018 "DC" rod has become. Now one has to really look for it :(.
-
JI use .404 on my bucking saw, but not my felling saws. .404 definitely outlives 3/8.
-
J5 nails beg to differ. 🤪 But more importantly, did You use Duke's oil hitting those nails?! 🤔
-
JJunk Meister replied to the thread Wyby gets 4m views.Putting it lightly. Wonder if the vandal(s) used an electric chainsaw for ecology concerns and the advantage of silent/stealth mode...
-
JJunk Meister reacted to Frank bierce's post in the thread SELLING Jonsereds, Husky, Stihl parts with Like.
I’ll be listing stuff here and there for a bit. Time to start letting some stuff go. Stihl 084 filter assembly..base, filter and...
-
JJunk Meister reacted to hacskaroly's post in the thread Two Mile long 900 axle train, REAL Horsepower with Like.
That is pretty cool to see. A majority of the long trains headed through here in North Idaho usually have 3-5 locomotives in the front...
-
JJunk Meister reacted to jacob j.'s post in the thread Product Review - Traverse Creek replacement intake boots for McCulloch with Like.
Uncle Lee (@Lee H ) mentioned one time that he uses STP oil treatment to help slide the sealing ring of the boot onto the lip of the...
-
JHoward, You're down to either using an AM part from various makers, or, for OEM, use Husqvarna grommet, Part #: 529 49 78-01 in...
-
JJunk Meister replied to the thread SOLD Jonsered 2260.sending you a PM
