huskihl's latest activity
-
huskihl replied to the thread HELP! How to know when you have too much hook.Spot on. Thing is, cutting hardwood under 28-32”, you can’t make enough chips for the Buckin Billy Gullet to make any difference at all... -
huskihl reacted to Squish9's post in the thread HELP! How to know when you have too much hook with
Like.
This is the most common thing I see these days. People have heard get the gullet, they dig in deep, miss everything that matters and end... -
-
huskihl reacted to srcarr52's post in the thread HELP! Help with first time porting Echo 800P with Like.
I took 0.030" from the squish band when I did this 800P, then I had to raise the transfers 0.125" to get the transfer duration I wanted...
-
huskihl replied to the thread HELP! How to know when you have too much hook.This^. Sharper angles cut faster but don’t last as long. Blunt angles cut slower but don’t dull as easily. When your file is too low...
-
huskihl reacted to EFSM's post in the thread HELP! How to know when you have too much hook with Like.
It all depends on what you’re looking for. The sharper the hook the faster it should cut but it will have a more fragile cutting edge.
-
huskihl replied to the thread Foam filter? Or leave it with the stock filter? MMWSms462.With air injection I wouldn’t think it would really be necessary. The two-piece cover saws benefit from it because there’s no air...
-
huskihl replied to the thread HELP! Help with first time porting Echo 800P.Hard to do without the proper tools, but I would raise the upper transfers a bunch more than I raised the exhaust. I’ve never done an...
-
huskihl reacted to Mastermind's post in the thread HELP! Help with first time porting Echo 800P with Like.
https://opeforum.com/threads/mastermind-meets-the-echo-800p.2360/
-
huskihl reacted to Woodpecker's post in the thread HELP! Help with first time porting Echo 800P with Like.
@Stump Shot @Mastermind @huskihl @farminkarman
-
huskihl replied to the thread ms500i my way.Walbro hda-199. From the 357 and 359.
-
When my dad started out running saws for a living he didn't wear hearing protection he's as deaf as a post now days. ya can't have a...
-
huskihl reacted to whitesnake's post in the thread Kawasaki engines...are they really that good...not seeing it with Like.
I have one on my 2003 Toro z master zero turn. I’ve owner it for about 20 years. It’s been absolutely problem free except for basic...
-
And it was awesome that the FSU cinnamon rolls rolled over the tide.😎
-
The Ohio State vs Texas game is a snooze fest. 😴
