FederalQ's latest activity
-
Two deep cycle battery's for the RV. Old ones were dated 2016 I guess the solar charger keeps them up nicely. Trailer rarely get plugged... -
$40 straight cash Homie
-
FederalQ reacted to heimannm's post in the thread Are 1/4 pitch 0.050 chains like 13RMS and H00 compatible with 71PM3 type spur sprockets? with
Like.
Although the pitch is the same, the chassis height is different and will require a different sprocket to fit each chain correctly, much... -
FederalQ reacted to DND 9000's post in the thread HELP! Carb leaks fuel in throat when primed with Like.
Don't use pump fuel. Use some type of alcylate fuel like Aspen or something similar and you will not have these problems. Also run it...
-
I doubt you will get 25 years out of a 70, and I’d be surprised if you like the weight of a 91. Check for air leaks on the 80...
-
FederalQ reacted to SOS Ridgerider's post in the thread What oil is best? and what ratio? with Like.
It doesn't really have much to do with oil we use in chainsaws, but I got to go to the Motorex USA and Spectro facility today. Went...
-
What do y'all think about a Volvo S40? It's mine for $100 after road limits are off in a bit over a month and I can go get it with my...
-
100LL was not developed for the Navy in 1913... It does store for a long time, although not infinitely. It also exposes you to the...
-
We moved a few saws into the new display area today. We also moved these Orline powered non-saws; drill and generator. The Orline...
-
FYI 603/609 Main Street Dike, Iowa 50624
-
The brothers that hosted in the past have run into some issues (not related to the GTG) and have not been able to put it together again...
-
That was my thought but I’m sure the porters can elaborate on this…
-
FederalQ replied to the thread Another chainsaw dyno....M-tronic doing it‘s thing?
-
FederalQ reacted to av8or3's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
I have always selected slightly forward of center. (Advanced). If there are marks where it WAS , use them.
-
FederalQ reacted to ErnieG's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
With the ignition there is a small bit of adjustment between the slots ...what would be the best place to set this ? Thanks Ernie I do...