ErnieG's latest activity
-
ErnieG reacted to Powerstroke Cowboy's post in the thread New to me Yamaha royale venture with
Like.
I wouldn't mess with it at all. Who knows what they might say you did to it, and try and get you to pay to fix it. Leave the bike as you... -
ErnieG reacted to davidwyby's post in the thread The forestry and logging pictures thread with Like.
-
id say grandma has some wisdom, at this point if I was in your shoes, I would push it out next to the road and tell them to make...
-
your crank jack would still do that then pull the pin and toss it out of the way. I understand your concerns. It looks like your...
-
ErnieG reacted to SawAddictedFarmer's post in the thread HELP! Wood splitter jack placement with Like.
I like the idea of a hand crank to get it up and then setting it on a jack stand with a ball to hold it while working.
-
ErnieG replied to the thread HELP! Wood splitter jack placement.I do like the idea of the adjustment leg under the splitter with multiple holes to pin it to the desired height but my ultimate goal is...
-
ErnieG replied to the thread HELP! Wood splitter jack placement.I like the idea but I think it would be a hassle carrying around the jack stand and have to lift the splitter to get it on the stand ...
-
How about welding/bolting a hitch ball to the top of a jackstand a putting it under the ball hitch. You won't have to screw with the...
-
If you unbolt the hitch, find some square tube to weld a ?piece of 2-1/2" " sq. tube vertically with holes (5/8"maybe 9/16") one on each...
-
Everything up top is 288. Rebuilt, Ported.
-
ErnieG reacted to redneckhillbilly's post in the thread HELP! Wood splitter jack placement with Like.
maybe weld an automotive scissor jack to the bottom of the tongue, than stuff a round under there and use the jack to level it off, at...
-
I'd be interested to see the carb linkage set up. The 181 used a metal rod link connection to the carb. The 288 used a pad contact...
-
Looks to possibly be a complete clutch issue too. Different spider, counterweights, and springs between your two saw examples David...
-
Checked and the case is a 181 hodgepodge build
-
I'm looking for some ideas on a jack stand for my wood splitter. I had a side mount crank style on it and it gets in the way of the log...
-
