Cat 525's latest activity
-
Cat 525 reacted to Stump Shot's post in the thread PAST 2025 Northern Wisconsin GTG September 20th with
Like.
Even though we were missing some of our more regular attendees, we still managed a chord and a half an hour cut, split and stacked(or... -
Cat 525 reacted to redline4's post in the thread PAST 2025 Northern Wisconsin GTG September 20th with Like.
Wouldn't matter to me if you wanted to incorporate a bit more legit race stuff. As anyone who knows me, knows I'll run whatever, without...
-
Cat 525 reacted to redline4's post in the thread PAST 2025 Northern Wisconsin GTG September 20th with Like.
A big thank you to Steve for putting this on. Food was, as always great! @kurtz can't believe you ripped the tarp....
-
Cat 525 reacted to stihl livin's post in the thread PAST 2025 Northern Wisconsin GTG September 20th with Like.
Will we notice a difference?
-
Cat 525 reacted to huskihl's post in the thread 372 sputters when tipped, passes spray test with Like.
026 failing the tip test is more likely fuel pooling in the intake and in the lower transfer ports. L screw needs to be leaned out a...
-
Cat 525 reacted to huskihl's post in the thread 372 sputters when tipped, passes spray test with Like.
Something else I’ve learned along the way. If your carb screws are normally at one and one, turn the H out 2 turns. Hold the saw wide...
-
Cat 525 reacted to huskihl's post in the thread 372 sputters when tipped, passes spray test with Like.
Might be able to remove the clutch, worm gear, oil pump off PTO side and pull the bushing and see if the bearing retainer is still in...
-
Cat 525 reacted to Stump Shot's post in the thread PAST 2025 Northern Wisconsin GTG September 20th with Like.
Have Sloppy Joes for lunch with beans and tater salad, chips and whatnot, so everyone is refreshed and fueled to play with saws.
-
One time when I was tech at a certain shop, I lost a 1/4 drive ratchet on a car. Couldn't find it anywhere, the customer had to pick up...
-
Saw fired right up again this morning. I'm chalking this up to condensation in the tank. I should have refueled when I quit, That way...
-
I carry a shoelace in my saw toolbox to tie down the trigger at WOT, easy and fast enough to take it of once the engine starts to...
-
Some pulls with fast idle engaged might get you going. If not, set the bar tip on some wood, hold the throttle wfo with your right...
-
Paraffin based vs. asphalt based. Extremely low wear. Unfortunately it sludges and the masses find that offensive. I’m talking car/truck...
-
Cat 525 reacted to jacob j.'s post in the thread HELP! So where do we go from here folks? with Like.
Ok guys - I've been directed to lock this up. Thanks.
-
Stupid sarcastic idea, but maybe from now on we set aside one day per year to air grievances. Someone creates a *b-word thread and we let...