What's on your bench?

[usmcbuckwild]

Beamjag Racing...... Making saws scary fast since 2018........

Custom strato ports? Those teefs help chew up the smalls that make it past the filter to save the top end?

 

[Sty57]

Maxed out?

It's getting there.......

 

[Cut4fun]

Yay some time for my own stuff. Conversion done.

 

[Frank bierce]

Yay some time for my own stuff. Conversion done.

View attachment 146770 View attachment 146771 View attachment 146772

Looks great!!

 

[Cut4fun]

Looks great!!

I was missing this with full wrap that I sold to local logger (FW 385 and FW 372).
So went looking FW to put on the 505 with big dawgs.

 

[NWWrench]

Drilled out exhaust studs on Sunday and tossed the stock Cat manifold in recycle and installed a PDI manifold, way better set up.

 

[usmcbuckwild]

My little home made mill didn’t have the reach to do the MS660 cylinder. So, I made me a mandrel and did the squish by hand. Worked pretty good! Next time i need to ensure the chip relief in front of the chisel is bigger. Had to stop every 3/4-1 turn.

 

[Onan18]

My little home made mill didn’t have the reach to do the MS660 cylinder. So, I made me a mandrel and did the squish by hand. Worked pretty good! Next time i need to ensure the chip relief in front of the chisel is bigger. Had to stop every 3/4-1 turn.

View attachment 146806 View attachment 146807 View attachment 146808

Nice work Curt, looks excellent.

 

[usmcbuckwild]

Nice work Curt, looks excellent.

Thanks man!

Its not perfect, not how I would build a “shop tooling” but it worked remarkably well for what it is. Took about 15 minutes to make; used the worn piston, an old chipped wood chisel and some jb weld. Slot in piston was made with dremel cut off wheel, test fit the chisel piece and ground it to the fit I wanted, mixed up the jb weld, and slobbered it all together. Used a piston ring compressor to set the width of the chisel piece. Let it set up for a few hours and gave it a whirl. I did find a 1/2” drive extension fits perfectly into the con rod pocket in the piston (rotated 45*), tapped the extension in with a hammer and locked it in the vice. Easy day.

 

[MG porting]

Yay some time for my own stuff. Conversion done.

View attachment 146770 View attachment 146771 View attachment 146772

Very nice looks good.

 

[Postrip]

What’s on my bench....?
A very tidy 084!
This thing is schmick right throughout, possibly the tidiest 1 I’ve ever seen

 

[drf256]

Maxed out?

You rang?

My Maxed out unicorn came apart last Sunday. A lot of great findings, like a 5/16” Allen bolt replacing an M5 bolt for the muffler face mount to case. Hole so big, no timesert will fit.

For reference, the bolt in the left is already M6 (not the M5 for 064)

 

[drf256]

It’s got the special floating coil option as well.

 

[drf256]

Then, of course, the “Unicorn Jug” he said he wanted to give me because of spite. He didn’t want to give it up for sale.

I’m impressed he used a KS piston in mine. Used, but still KS. I’m sure it’s somehow my fault.



Happy the guy is out of my life. The above saw cost me over $1000 all in. Thank god it’s a hobby and It’s supposed to cost some money. As usual with his builds, he used Junk.

 

[Widowmaker1]

372's 272 288 064's on the rebuild


tidy all original oem 064




meteor Kit for the 288, away with the chrome and in with the Nikisil

 

[T.Roller]

Then, of course, the “Unicorn Jug” he said he wanted to give me because of spite. He didn’t want to give it up for sale.

I’m impressed he used a KS piston in mine. Used, but still KS. I’m sure it’s somehow my fault.

View attachment 146848 View attachment 146849 View attachment 146850 View attachment 146851 View attachment 146852

Happy the guy is out of my life. The above saw cost me over $1000 all in. Thank god it’s a hobby and It’s supposed to cost some money. As usual with his builds, he used Junk.

Damn

 

[Onan18]

You rang?

My Maxed out unicorn came apart last Sunday. A lot of great findings, like a 5/16” Allen bolt replacing an M5 bolt for the muffler face mount to case. Hole so big, no timesert will fit.

For reference, the bolt in the left is already M6 (not the M5 for 064)

View attachment 146844 View attachment 146845

It’s got the special floating coil option as well.

View attachment 146846 View attachment 146847

Then, of course, the “Unicorn Jug” he said he wanted to give me because of spite. He didn’t want to give it up for sale.

I’m impressed he used a KS piston in mine. Used, but still KS. I’m sure it’s somehow my fault.

View attachment 146848 View attachment 146849 View attachment 146850 View attachment 146851 View attachment 146852

Happy the guy is out of my life. The above saw cost me over $1000 all in. Thank god it’s a hobby and It’s supposed to cost some money. As usual with his builds, he used Junk.

That sucks Al.

 

[usmcbuckwild]

Then, of course, the “Unicorn Jug” he said he wanted to give me because of spite. He didn’t want to give it up for sale.

I’m impressed he used a KS piston in mine. Used, but still KS. I’m sure it’s somehow my fault.

View attachment 146848 View attachment 146849 View attachment 146850 View attachment 146851 View attachment 146852

Happy the guy is out of my life. The above saw cost me over $1000 all in. Thank god it’s a hobby and It’s supposed to cost some money. As usual with his builds, he used Junk.

You want his kneecaps?

 

[MG porting]

View attachment 146835 What’s on my bench....?
A very tidy 084!
This thing is schmick right throughout, possibly the tidiest 1 I’ve ever seen

Yea that looks very clean I would almost consider trading my 064 for one of those but I think part's are even harder to get for the 084.

 

[David Young]

It’s got the special floating coil option as well.

View attachment 146846 View attachment 146847

do you have the Stihl part number for the floating coil option?