What's on your bench?

[M2theB]

Kid down the road, with a small landscaping business, had this 261 given to him by a client. Cleans up nice. Trying to find a 262xp top for him.

 

[Stevetheboatguy]

Old burb wouldn't start for my wife......... Sum ting wong..............





Have to love Chinese quality control. Bring manufacturing back state side PLEASE! This one didn't even make it 100mi.


Steven

 

[Bigmac]

Old burb wouldn't start for my wife......... Sum ting wong..............

View attachment 236538 View attachment 236539



Have to love Chinese quality control. Bring manufacturing back state side PLEASE! This one didn't even make it 100mi.


Steven

I am so done with the China junk! Half of the msd stuff is China made, and the failure rate is high! I am sick of it! The last blaster ss coil I bought for my dads Jeep just failed two days ago, yep China! I had one msd distributor cap that was, and the carbon ball fell out of the inside, and it was aluminum contacts, what a joke, the USA made version looks similar but isn’t the same in the critical areas! Yes more USA made production! The downside is the USA made hvc blaster 2 coil retails for $240, I have found them cheaper but it’s still pricey! Still getting one! Lol

 

[rogue60]

My 090AV is next in line kind of neglected the poor old girl for a few years time to bring her back to life.



And this ms280c 54.7cc got it for cheap been looking for one cheap for a few years.
I like oldball saw's this and the ms270 are kind of one off odd design clamshell thingy am looking forward to pulling it down see how it work's and tweak it a little here and there.
Running it for only a few min I've worked out the way the rear trigger engages the chain brake is a good idea for the walking brain dead and we all know there are many that fall into this category out there! but for me it will be one of the 1st thing's to go in the trash on this saw lol

 

[RI Chevy]

Cool saws there...

 

[av8or3]

I wouldn’t go to the trouble of trying to fix up that old 090. A blind man can see it’s wore out. I’ll PM
you an address you can mail the carcass to, and I’ll see it gets a proper burial.

 

[RI Chevy]

Nah. It's not that bad...

 

[kingOFgEEEks]

My 090AV is next in line kind of neglected the poor old girl for a few years time to bring her back to life.
View attachment 236555 View attachment 236556
View attachment 236557

And this ms280c 54.7cc got it for cheap been looking for one cheap for a few years.
I like oldball saw's this and the ms270 are kind of one off odd design clamshell thingy am looking forward to pulling it down see how it work's and tweak it a little here and there.
Running it for only a few min I've worked out the way the rear trigger engages the chain brake is a good idea for the walking brain dead and we all know there are many that fall into this category out there! but for me it will be one of the 1st thing's to go in the trash on this saw lol
View attachment 236558

I always liked the idea of those MS 280s, but they have a bad reputation. I think it was intake boots.

 

[merc_man]

Some parts for a 020t is on my bench. But im missing an important part and im sure i have it somewhere. The crankshaft. Guess this is on hold till i locate it or get an aftermarket one off fleebay

Sent from my SM-G950W using Tapatalk

 

[WillG]

Getting my new box setup. Got rid of a dead fridge, my dad has one that works perfectly for me that I'm getting tomorrow. Ultrasonic cleaner is going on top of the fridge and I have a small Craftsman box that's going on top of the Husky box for parts etc..gonna put my stereo on top of the Husky box as well. Also got a Shindaiwa brushcutter running for a customer.

Sent from my E6910 using Tapatalk

 

[Stevetheboatguy]

Think I'm going to loose it with the parts guys. This is freaking sick. Broken before it left the box.



Not cool.

Guess it's par for the course right now.



Steven

 

[RI Chevy]

Jeeesh. WTF. Sorry Steven.

 

[Stevetheboatguy]

Jeeesh. WTF. Sorry Steven.

All good. I always have a ace up my sleeve. That black cloud won't/ can't stop me.


Steven

 

[RI Chevy]

Good deal!

 

[JohnnyBlade]

Changing it up a lil bit. Still got to have some dark side in her 034. If it turns out good ill prob pull her back apart and powder the cases. Never ran one before.

 

[WillG]

Changing it up a lil bit. Still got to have some dark side in her 034. If it turns out good ill prob pull her back apart and powder the cases. Never ran one before. View attachment 236702

For 56.5 cc they do good. Mines setup 3/8-7 pin 20" and it does excellent. Mines a West German built one with side tensioner.

Sent from my E6910 using Tapatalk

 

[JohnnyBlade]

For 56.5 cc they do good. Mines setup 3/8-7 pin 20" and it does excellent. Mines a West German built one with side tensioner.

Sent from my E6910 using Tapatalk

What would be a stock comparable husky? Mine is front tentioner. Ya it will just be a 20" saw. About all we need in our neck of the woods.

 

[WillG]

What would be a stock comparable husky? Mine is front tentioner. Ya it will just be a 20" saw. About all we need in our neck of the woods.

Probably a 55. my buddy's dad has one, might see if I can borrow it for a comparison.

Sent from my E6910 using Tapatalk

 

[JohnnyBlade]

Probably a 55. my buddy's dad has one, might see if I can borrow it for a comparison.

Sent from my E6910 using Tapatalk

I had a 55 that i ported and it ran really good. Id post a video but pootube cancelled my *s-word and my rebutle was never answered! I guess i really dont matter to them. A dozen chainsaw vids wasnt worth their time.

Sweet, that would be cool!

 

[huskihl]

I had a 55 that i ported and it ran really good. Id post a video but pootube cancelled my *s-word and my rebutle was never answered! I guess i really dont matter to them. A dozen chainsaw vids wasnt worth their time.

Sweet, that would be cool!

That sucks. Your YouTube was full of Frank’s Follies. Try Vimeo