SOLD Stihl MS064 with 2 bars and 5 chains, $675 plus shipping

[dieselfitter]

Stihl MS064 with 24" and 32" bars and 5 chains. The previous owner used it for milling and due to health conditions, was no longer able to start it. The 32" bar is a Stihl Rollomatic 3/8"-.050"(like new). The 24" bar is an Oregon 3/8"-.063". The chains are an assortment, Oregon LGX 32"(new), Oregon ripping chain, semi-chisel chain ground for milling... The saw starts 3rd pull and runs good. It is an earlier 064, it has the magnesium air filter cover. It has the normal worn paint from use. I don't see any cracks in the case or covers, no epoxy repairs. It looks to be unmolested, just normal wear.
If any of you have run Andy's/Dodgegeeks 064 ported by Treemonkey, you would want this saw and have it sent directly to Scott for porting. I was going to have Treemonkey port it and keep it. I already have a 288xp ported by Treemonkey and cannot justify ownership of two saws in this size.
Thanks, Tim

 

[dieselfitter]

 

[dieselfitter]

Here is a link to a 6 cube build off competition where Andy ran his 064. If memory serves, it came in second to Randy's build. Keep in mind the 85cc 064 was running against saw up to 100cc.
It's kind of interesting...

 

[DSS]

Is this an OEM piston or a tuna can?

asking for a friend

 

[Normzilla]

Ms064? parts on it or something, or is it an 064?

 

[dieselfitter]

Is this an OEM piston or a tuna can?

asking for a friend

Move along cow, nothing to see here...

Ms064? parts on it or something, or is it an 064?

The tag on the saw is "064AV". I guess that would make it an 064AV and not a MS064.

 

[Normzilla]

Move along cow, nothing to see here...

The tag on the saw is "064AV". I guess that would make it an 064AV and not a MS064.

No worries, figured so. Just thought it could have been if it had ms parts, which I did not think. Nice saw man, old classic!

 

[mels]

 

[Cracker Boy]

Great saw if i didnt allready have one id be all over it

 

[dieselfitter]

Great saw if i didnt allready have one id be all over it

Thanks. I've heard of lessor 064's selling for $1500.

 

[Cracker Boy]

Thanks. I've heard of lessor 064's selling for $1500.

If they are ported they will.i stold mine got it for 450.completely rebuilt new seals bearings and all

 

[Wood Doctor]

I already have one of these 064 AV's. It's a brute and yes, a bear to start. No decomp valve. But, I can still do it on command. I wish mine had the Elastostart to make it easier. Some say this saw will out cut an MS660, but that's likely never been proven.

I know one thing. I'm glad I own it. This saw always raises eyebrows at the GTG's, kind of like a rare stallion.

 

[jake wells]

GLWS that is a nice saw.
hooray 064!

 

[dieselfitter]

GLWS that is a nice saw.
hooray 064!
View attachment 82237

Nice saw Jake. Are you happy with what you paid? I've heard of *dipsticks paying $1500 for a pos 064 with chicom parts.

 

[Time's Standing Stihl]

Are you happy with what you paid?

I bet he is tickled to death

 

[Dub11]

I bet he is tickled to death

What is it that makes people turn in to dbags after getting a restored 064?

 

[Time's Standing Stihl]

What is it the makes people turn in to dbags after getting a restored 064?

Lol, I restored my own. I wasn't gifted one!

But yes, the other two. ..total dbags

 

[Dub11]

Lol, I restored my own. I wasn't gifted one!

But yes, the other two. ..total dbags

Lol I meant the gifted ones. Restoring your own is the right way to go about it.

 

[leadfarmer]

Lol, I restored my own. I wasn't gifted one!

But yes, the other two. ..total dbags

So your sayin your not a dbag? [emoji23]

Sent from my SM-G900V using Tapatalk

 

[bryanr2]

What is it the makes people turn in to dbags after getting a restored 064?

Self entitlement?