WANTED Stihl bar to Husqvarna adapter

[brushwacker]

Looking for the best deal on an good quality adapter to use the same bars my ms660 uses to use on my 395xp , possibly 2. New or used in excellent condition.
Cash or trade. I have a fair amount of various new and used chain and parts.
Can see some of what i have in past ads here and the other site.

 

[cuinrearview]

Like this?
https://www.baileysonline.com/canno...5dX20rTfWv7CByMn8GXxsr1MmNTZE66hoCKhMQAvD_BwE

 

[srcarr52]

Dave has some as well.

https://www.ebay.com/itm/324146373185?epid=1663481745&hash=item4b78a12241:g:q8kAAOSwjrZdAPN1

@Homelite410 also makes some.

 

[Hinerman]

Like this?
https://www.baileysonline.com/canno...5dX20rTfWv7CByMn8GXxsr1MmNTZE66hoCKhMQAvD_BwE

Dave has some as well.

https://www.ebay.com/itm/324146373185?epid=1663481745&hash=item4b78a12241:g:q8kAAOSwjrZdAPN1

@Homelite410 also makes some.

Is there an adaptor for the 14mm Stihl bars (that fit the 880)?

 

[cuinrearview]

Is there an adaptor for the 14mm Stihl bars (that fit the 880)?

 

[mikerudder]

Is there an adaptor for the 14mm Stihl bars (that fit the 880)?

https://www.cannonbar.com/bar-mounts-and-adaptor-plates/
Cannon has a 14mm to 9mm Husqvarna mount.

 

[Int1968]

^why the disclaimer * for milling bars only? Regarding stihl 3002 bars to 9mm husky

 

[qurotro]

Wait. What bar do you have in your hand? OEM Stihl bar can not be used just by adding a spacer. You need to lengthen the slot a bit. Actually you can buy a steel tube and cut rings to take up the space. That's what I do.

 

[srcarr52]

^why the disclaimer * for milling bars only? Regarding stihl 3002 bars to 9mm husky

Because it's for their G1 mount which has provisions to use the oil groove on the smaller mount (H1, S1) saws. A standard Stihl 14mm extra large mount has the oil holes that don't line up with the oil supply grooves on these saws.

 

[Int1968]

Thanks for the clarification

 

[Wilhelm]

I have an adapter for every 12 & 14mm mount bar I never intend to own.
Don't know whether my 45mm adapter would fit Your 395!
What is the stud spacing on that saw?

 

[Wilhelm]

Is there an adaptor for the 14mm Stihl bars (that fit the 880)?

I have seen all sorts of adapters on eBay, the most common ones are:
8 to 12mm
9 to 12mm
9 to 14 mm
12 to 14mm

Some are as simple as a wire ring or a bent piece of tin sheet.

 

[brushwacker]

Bailys looked like the best deal until shipping was added . Bout doubled the price. I want to make sure I get the correct 1 and prefer something well made and easy to keep track of. If no one here can do me as well as ebay conveniently I will likely shop for the best deal there. I think I might have 1 somewhere if i didn't sell it and forgot. Just don't remember if i sold it or where I left it.

 

[mikerudder]

Bailys looked like the best deal until shipping was added . Bout doubled the price. I want to make sure I get the correct 1 and prefer something well made and easy to keep track of. If no one here can do me as well as ebay conveniently I will likely shop for the best deal there. I think I might have 1 somewhere if i didn't sell it and forgot. Just don't remember if i sold it or where I left it.

The cannon ones are well made, but as it was said before you may need to drill an additional oiler hole to match your bar to your saw.

 

[Wilhelm]

Bailys looked like the best deal until shipping was added . Bout doubled the price. I want to make sure I get the correct 1 and prefer something well made and easy to keep track of. If no one here can do me as well as ebay conveniently I will likely shop for the best deal there. I think I might have 1 somewhere if i didn't sell it and forgot. Just don't remember if i sold it or where I left it.

I can't open the Bailey link.
What are they asking for their adapter before shipping, and how does the adapter look like?

These are mine, solid steel milled.
Tooling steel, not heat treated.
9to12mm & 9to14mm , they accommodate up to 45mm stud spacing.

 

[brushwacker]

I can't open the Bailey link.
What are they asking for their adapter before shipping, and how does the adapter look like?

These are mine, solid steel milled.
Tooling steel, not heat treated.
9to12mm & 9to14mm , they accommodate up to 45mm stud spacing.

Bailey s was $9 + and shipping 9 +, $19ish total. Same on eBay $13.75 shipped.
Yours look nice and well made.

 

[Bill G]

Well if no sponsor here can get you taken care of and Baileys is too high then there is always Amazon which I am not found of but that is an option. Here ya go
If you have Prime the shipping is free. If you do not I do. So do thousands of other members here. I can order you one and have it dropped shipped to you as a gift so it is just the purchase price

 

[Bill G]

Well that link didn't work.... Any event you get the idea

 

[Wilhelm]

Bailey s was $9 + and shipping 9 +, $19ish total. Same on eBay $13.75 shipped.
Yours look nice and well made.

Thanks!
It took a while and a couple design changes to get the adapters to that stage.
I started by making adapters specific to a single saw model, then altered the design 4 times to ad universal fitment to multiple saw models.

 

[brushwacker]

Is the woodland pro bar rail grinder a good machine?