ms 462

[mdavlee]

So no isolator? Sorry I’m slow.

I added a small AV plug from a 044 to the 661 to help spread the load out on that spot and limit travel a little bit.

 

[huskihl]

I added a small AV plug from a 044 to the 661 to help spread the load out on that spot and limit travel a little bit.

3/16 rubber fuel line works too. The thick stuff

 

[ferris]

Guess that’s a Wrap, lol.
View attachment 166573

That is the clutch from the rescue saw.
Why you don’t remove the extra stuff from that?

 

[RyeThomas]

I’m waiting on the larger inner spike, then I need to find the part number for the roller chain catcher and I can get her how I want. For now it works.

Plus my saw hangs out with the real rescue saws on the truck at work, she’s a bit jealous. Lol

 

[Redbull661]

down at scotty too hotty's today. After Scott did some more R&D work, found some big gains in the 462. Previous best ported time was 35.1 on this saw. Now 32.3. Ported 461 was 30.2. Just 2 seconds away from 461. Which is still a tall order considering more displacement and larger carb on 461

previous 461 vs 462 test

 

[Stump Shot]

@tree monkey and/or @Redbull661
Curious to know if there was any difference found between the stock 462's sent from Europe and the stock 462's sold in the United States as they came from Stihl.

 

[Iceboy]

Good question

Sent from my LM-X212(G) using Tapatalk

 

[Bullets]

Nice job guys
can hear it four stroking a little better than before
Sounds like a safe tune awesome

 

[andyshine77]

That's a big improvement, nice!

 

[tree monkey]

@tree monkey and/or @Redbull661
Curious to know if there was any difference found between the stock 462's sent from Europe and the stock 462's sold in the United States as they came from Stihl.

about the only thing I see is there's no screen in the muffler of the Europe muffler

 

[BonScott46]

about the only thing I see is there's no screen in the muffler of the Europe muffler

I think most of the time the difference is in the muffler.

 

[Stihl working Hard]

@tree monkey and/or @Redbull661
Curious to know if there was any difference found between the stock 462's sent from Europe and the stock 462's sold in the United States as they came from Stihl.

Great point there Steve wouldn’t think so but you never know.

 

[RI Chevy]

I noticed in the vid you were running the carbed 462 and not the mtronic. Are you done with the mtronic for now? Or just working with the regular carb 462 now?
Nice job nonetheless.

 

[Hinerman]

Got the piss knocked out of me when the fence wasn’t dead grounded out [emoji15]

PICS!!!! Welcome back...

 

[mdavlee]

PICS!!!! Welcome back...

fence is buried in that mess [emoji23]

 

[Hinerman]

My dealer has one on the shelf. $1149.00! Surprised me:

 

[Evansaw]

down at scotty too hotty's today. After Scott did some more R&D work, found some big gains in the 462. Previous best ported time was 35.1 on this saw. Now 32.3. Ported 461 was 30.2. Just 2 seconds away from 461. Which is still a tall order considering more displacement and larger carb on 461

previous 461 vs 462 test

Question: gains transferable also to m tronic version or subjected to adj.carb parameters

 

[huskyboy]

What kind of changes did you do to the saw? (I understand if you guys want to keep it a secret).

 

[tree monkey]

Question: gains transferable also to m tronic version or subjected to adj.carb parameters

same mods on both std carb o m-tronic, I don't see any advantage to a std carb saw

 

[tree monkey]

What kind of changes did you do to the saw? (I understand if you guys want to keep it a secret).

I used my spinny thing