HUSQVARNA HUSQVARNA THREAD

[Stackowood]

266 SG

Even some of the Stihl guys would have to appreciate that! Nice work.

 

[Tor R]

Thanks and hows that heart doing?

Thanks for asking, it goes forward most of the times, struggle with a bit medecine side effect.

 

[Dub11]

Thanks for asking, it goes forward most of the times, struggle with a bit medecine side effect.

Good to hear and meds kind of suck sometimes

 

[Dub11]

View attachment 61846 View attachment 61848 View attachment 61847

266 SG

Ya gotta put a warning on that man about got blinded

 

[Majorpayne]

View attachment 61846 View attachment 61848 View attachment 61847

266 SG

Shelf queen?

 

[exSW]

Shelf queen?

No. Powder coating is supposed to be tough.

The 24" Sugi originally came on the 266. Think I should get it jeweled?

 

[Dub11]

No. Powder coating is supposed to be tough.View attachment 61889

Watcha got there?

 

[exSW]

Watcha got there?

Jred 2186,Zoo City Saws. Clutch cover didn't make it to the powder coater.

 

[astnmacgto]

Here she is, starts and runs fine. 390xpg, Idk if the handle works, does it have to be a certain rpm

 

[astnmacgto]

 

[astnmacgto]

And, it only set me back 140 bucks

 

[Dub11]

Jred 2186,Zoo City Saws. Clutch cover didn't make it to the powder coater.

Nice! Shiny is overrated

 

[Dub11]

And, it only set me back 140 bucks

Whole saw ? Or the xpg kit? Either way sweet.

 

[astnmacgto]

Whole saw ? Or the xpg kit? Either way sweet.

Whole thing

 

[Dub11]

And ya suck.

 

[Tor R]

View attachment 62239

sweet!!!
Pay attention to the black strips on your xpg front handle, the earlier owner knew how to prevent front handle wire issue as most 2xx & 3xx serie saws get without a plastic strip.

 

[Stump Shot]

View attachment 61846 View attachment 61848 View attachment 61847

266 SG

That's Purdy! Looks like a really nice job, look forward to seeing it all back together. Those saws are still legendary in the woods here, and still out there working.

 

[astnmacgto]

sweet!!!
Pay attention to the black strips on your xpg front handle, the earlier owner knew how to prevent front handle wire issue as most 2xx & 3xx serie saws get without a plastic strip.

Does the saw have to be running at a certain rpm in order to heat the handle?

 

[mdavlee]

The 266 I have heats at idle.

 

[Tor R]

Does the saw have to be running at a certain rpm in order to heat the handle?

its an simple design, generator + flywheel magnet, more rpm more heat. I read in one of the old workshop manual, 10k rpm = 20 voltage
As Mike said, it do produce heat on idle, how much depend on the model.