WILLinAK
Well-Known OPE Member
I would post pic but I'm doing this from my phone and it's a pain.
Fully stripped down ms360, crack is about half to 3/4 way through in the thinnest section of handle assembly near the dog bone/front end. I've heard from a buddy to epoxy the crack then epoxy sections of thin aluminum on both sides of crack. Tight budget now, or I would source a new handle. Also heard AM handles have fitment issues, or I would just buy the farmertec handle. I'm keeping the saw FWIW. Let me know your thoughts.
Fully stripped down ms360, crack is about half to 3/4 way through in the thinnest section of handle assembly near the dog bone/front end. I've heard from a buddy to epoxy the crack then epoxy sections of thin aluminum on both sides of crack. Tight budget now, or I would source a new handle. Also heard AM handles have fitment issues, or I would just buy the farmertec handle. I'm keeping the saw FWIW. Let me know your thoughts.