560xp in the states ?

[sawmikaze]

What are the odds I can find one here, I want a new 60cc saw and I'm not into the large bar mount of the 562...and no I don't want another 2260.

Shed some light for a brother.

 

[kingOFgEEEks]

Find a triple nickle and swap top ends? Wouldn't have the stuffers, but I bet it would run close.

 

[sawmikaze]

Find a triple nickle and swap top ends? Wouldn't have the stuffers, but I bet it would run close.

Nah, too much money involved..I don't want one THAT bad.

 

[kingOFgEEEks]

Let me rephrase - find a burned up 555, and put the 562 top end on

 

[sawmikaze]

Let me rephrase - find a burned up 555, and put the 562 top end on

Pass on that too.

 

[Tor R]

None of the solutions will be cheap Ryan, them 560 xpgs is expensive over the pond, we just dont have them nice prices as your guys has, last time I checked it was ruffly 1250$ for one here.

What about to start with a toasted 555, I would say one who blew the crank and ruined the top end as well, because you dont want them parts.
There is a short block for 562, #580663710, but if I got it correct there is also a short block for 560, should be 580663709, belive the numbers for 560 was 580663703, 05, 07, 09, with a new top end it aint that bad math

 

[sawmikaze]

None of the solutions will be cheap Ryan, them 560 xpgs is expensive over the pond, we just dont have them nice prices as your guys has, last time I checked it was ruffly 1250$ for one here.

What about to start with a toasted 555, I would say one who blew the crank and ruined the top end as well, because you dont want them parts.
There is a short block for 562, #580663710, but if I got it correct there is also a short block for 560, should be 580663709, belive the numbers for 560 was 580663703, 05, 07, 09, with a new top end it aint that bad math

I just wanna buy one

 

[Tor R]

I just wanna buy one

I'm surprised that Husky doesnt sell the 560 over there, but I guess they realized that your guys wouldnt appreciate it

 

[jakethesnake]

Thought you went team stihl an stuff

 

[sawmikaze]

Thought you went team stihl an stuff

I've always wanted a 560.

 

[jakethesnake]

I never knew they existed. They auto tuned and stuff. ? I don’t really have a dealer here. Team stihl sorta took over these parts

 

[cus_deluxe]

Exact same as a 562, just small mount right?

 

[Deets066]

I've always wanted a 560.

So picky

 

[sawmikaze]

Exact same as a 562, just small mount right?

Right

 

[afleetcommand]

555 cases, 2260/560 crank, oil pump lines, clutch side cover, pump and and worm gear, 562 everything else... Not as simple as stuffing a 562 crank in a 555 small mount....won't work.

Posted this before somewhere, but essentially building a 560 out of a combination of parts from a 562, 2260, and 555

 

[BonScott46]

None of the solutions will be cheap Ryan, them 560 xpgs is expensive over the pond, we just dont have them nice prices as your guys has, last time I checked it was ruffly 1250$ for one here.

What about to start with a toasted 555, I would say one who blew the crank and ruined the top end as well, because you dont want them parts.
There is a short block for 562, #580663710, but if I got it correct there is also a short block for 560, should be 580663709, belive the numbers for 560 was 580663703, 05, 07, 09, with a new top end it aint that bad math

1250USD...I thought our prices were bad...560xp is around 800USD and the xpg is 900USD here. Can usually pick up a very nice used one for about 500.

 

[Tor R]

1250USD...I thought our prices were bad...560xp is around 800USD and the xpg is 900USD here. Can usually pick up a very nice used one for about 500.

just 6200 sek for the 560 in Sweeden?

 

[BonScott46]

6400 at 8:1 exchange

 

[Tor R]

6400 at 8:1 exchange

8900 listed on Huskies homepage in Sweeden though.
Never bought a new Husky from my dealer, clueless how much he would withdraw but I doubt 2500

 

[dustinwilt68]

Hell just buy a 2260 and call it good, simple solution, and it looks better in red and black anyways.