FOUND IT .404 .058 Chain Wanted

[northwest saws]

Hey there folks, I am in need of some chain in .404 pitch and .058 gauge. I am interested in reels, complete loops or partial loops. I would also prefer full skip but will consider full comp or semi skip as long as it has full chisel cutters. If in loop form it will be going on a 42" McCulloch bar. I believe the chain should have 122 drive links but if I'm wrong please correct me. Thanks!

Sent from my SM-N970U using Tapatalk

 

[Woodslasher]

I've got ~40 feet of .404 x .058 full comp chipper chain I'd give you, it sat outside for awhile but the 6 foot chunk I put in vinegar cleaned up pretty well. Just out of curiosity, do you know what the Oregon # is for the chain you're looking for?

 

[northwest saws]

I'm going to hold off on the full comp chipper chain for now but I do appreciate it. As far as Oregon chain goes I believe it's 58J.

Sent from my SM-N970U using Tapatalk

 

[Woodslasher]

Hmm, a neighbor said he had a bunch of 3 foot loops of Oregon #58 chain hanging around, I'll have to check in with him one of these days and see if it's what you're looking for.

 

[northwest saws]

That would be greatly appreciated thank you.

Sent from my SM-N970U using Tapatalk

 

[Maintenance Chief]

51L should be the ticket.

 

[Homemade]

Hey I hate to highjack the thread, but I’d be in the market myself. I’d like to make a few 24”
Loops.


Sent from my iPhone using Tapatalk

 

[northwest saws]

51L should be the ticket.

That's the full comp chipper chain correct?

Sent from my SM-N970U using Tapatalk

 

[Maintenance Chief]

That's the full comp chipper chain correct?

Sent from my SM-N970U using Tapatalk

Chipper would be 51C

 

[Maintenance Chief]

These should help. 1968 1982

 

[northwest saws]

That's super helpful thanks for that!

Sent from my SM-N970U using Tapatalk

 

[Woodslasher]

I mentioned it to my neighbor, he says he has two 36 inch loops of .404 x 0.058 chisel chain but he hasn't come up with a price or anything yet. I'll keep trying to get a # out of him, but I just wanted to let you know I hadn't forgotten.

 

[Pdotsaws]

Oregon 51 and 58 should be the same so, either one should work for you. I believe the 51 is just the earlier version.

Also, I believe the 42" cannon on my 394xp is 124dl.

 

[northwest saws]

I mentioned it to my neighbor, he says he has two 36 inch loops of .404 x 0.058 chisel chain but he hasn't come up with a price or anything yet. I'll keep trying to get a # out of him, but I just wanted to let you know I hadn't forgotten.

That would be great thank you!

 

[Woodslasher]

I checked with my neighbor, turns out his chain was #59 chain, which is 0.063

 

[Maintenance Chief]

https://www.ebay.com/itm/1544263602...b&brand=Oregon&_trksid=p2332490.c100891.m5206

Here's a new old box.

 

[northwest saws]

I checked with my neighbor, turns out his chain was #59 chain, which is 0.063

No worries thanks for checking.

Maint. Chief good find, I didn't see that one. I'll give it a look!

Sent from my SM-N970U using Tapatalk

 

[Woodslasher]

I just picked up a 2-3 foot length of new McCulloch .404 x 0.058 full comp chisel chain, cover shipping and it's yours.

 

[northwest saws]

That's mighty fine of ya! PM incoming.

Sent from my SM-N970U using Tapatalk