Any Chinese chainsaw and chinese parts discussion

[Czed]

These baby's are cool looking.

 

[Czed]

Could you See if these are available where you get the big bores 82cc 372 kits.

 

[p61 western]

The deal will be sometime this year... too busy right now to deal with shipping and what not... plus I got too much stuff in the barn. Gotta make room. See above post for pricing. Further pricing will have to be discussed via PM with each buyer.

No big hurry from me, when it gets close could you remind me about it?

 

[Mattyo]

Could you View attachment 82272 See if these are available where you get the big bores 82cc 372 kits.

what size bore is that. big bore is 52mm iirc

 

[Czed]

what size bore is that. big bore is 52mm iirc

Edisons in Australia has these saw's i'm told they are indeed upsized 372
If so i would like to try a couple.
Here is the saw the kits are replacements.

 

[Sleeper]

Could you View attachment 82272 See if these are available where you get the big bores 82cc 372 kits.

I found only the XTorq (71cc), 50mm (72cc), and 52mm (75cc) kits... no 82cc (54mm?) kits available from this guy, at least not yet.

I will ask if he can get them or if he has in the past and found problems like out of round, poor performance, etc. If there is poor performance, I suspect a proper opening of transfers will wake it up, since that seems to be the only problem with going up in bore size on a saw that was optimized for 72cc.

what size bore is that. big bore is 52mm iirc

I think it's 54mm... not sure though.

Edit: Did the math and 82cc kit is 54mm bore. If the ports were right, that thing would have some serious balls and turn 16,000 rpm out of the cut.

 

[Sleeper]

I think I may be opening a pretty big can of worms... in any case I just hope I hear back from that supplier. If not, onto another one.

Not sure about FOB stuff? Not exactly sure what to put into the quote request other than what the saws should be equipped with. I did put in USA, my state, and my zip code.

Forgot to put in a color... hopefully they ask or I remember if/when the supplier's secretary gets back to me.

 

[Sleeper]

Could you View attachment 82272 See if these are available where you get the big bores 82cc 372 kits.

Where did you find this? I looked on the site and can't find any 54mm kits. Found tons of 50mm and 52mm. Did different searches too. Spent about two hours on it.

I did shoot off an email to the parts guy that I am labeled as a dealer with. He hasn't gotten back to me yet. Probably looking for a kit right now, knowing the guy.

 

[Sleeper]

Shot off an email to the Aussies at Edison's. We'll see if they will spill the beans as to where they get the 82cc kits from. Or if they can even get them in the first place.

 

[Czed]

Where did you find this? I looked on the site and can't find any 54mm kits. Found tons of 50mm and 52mm. Did different searches too. Spent about two hours on it.

I did shoot off an email to the parts guy that I am labeled as a dealer with. He hasn't gotten back to me yet. Probably looking for a kit right now, knowing the guy.

Edisons in Australia and on Australia ebay.
Mtm is another version of it.
And a 92cc as well.

 

[Czed]

47.00 us plus shipping for the 82cc kit.
If they will ship here haven't checked.
I'm not 100% that they are not the every day big bore but a couple of guys have said that they are.
I don't really know.

 

[Sleeper]

47.00 us plus shipping for the 82cc kit.
If they will ship here haven't checked.
I'm not 100% that they are not the every day big bore but a couple of guys have said that they are.
I don't really know.

I would be interested in a 82cc kit... just to see about quality... maybe use it, not sure on that yet.

 

[Czed]

I think I may be opening a pretty big can of worms... in any case I just hope I hear back from that supplier. If not, onto another one.

Not sure about FOB stuff? Not exactly sure what to put into the quote request other than what the saws should be equipped with. I did put in USA, my state, and my zip code.

Forgot to put in a color... hopefully they ask or I remember if/when the supplier's secretary gets back to me.

They don't get in a hurry some took weeks to respond.
Aliexpress is there online store simple cut and dry.
If it's listed it's for sale that's where i bought 4 365s from.
But of course no 268/272 are offered on that site i have emailed and asked sellers there.
Any other saw yes but not those.
10-11 day's the saw's were at my door.

 

[Czed]

Check out the baumr ag vids on YouTube fuel lines and chain tensioners were an issue for a couple guy's.
But that was it.

 

[Sleeper]

They don't get in a hurry some took weeks to respond.
Aliexpress is there online store simple cut and dry.
If it's listed it's for sale that's where i bought 4 365s from.
But of course no 268/272 are offered on that site i have emailed and asked sellers there.
Any other saw yes but not those.
10-11 day's the saw's were at my door.

Oh... you mentioned the 268 was not offered? Dang it... I might not get anywhere with that either, then. I asked for a quote on alibaba, directly with a supplier.

Well, maybe an order of those 82cc 372 copies is what I should be chasing, at least if the 268 doesn't work out...

 

[Czed]

Put a couple more tank's through saw 1 running excellent until i ran out of bar oil.
Got most of this ash blocked
Saw's filthy time for a pressure washing.

 

[smokey7]

Im kinda interested in a group buy. Price and timing is inportant tho.

 

[Czed]

Ebay 270.00 shipped hus365

 

[Sleeper]

Got a "hi" back from the supplier... so they acknowledged me. I mentioned what color we want, which is orange, as close to Husqvarna orange as possible.

Reason for that is not to pass it off as a Husky, but to allow use of OEM parts, if one of the people that gets one of these saws has them in hand. So if they wanted a factory recoil cover, top cover, etc. on it to make it look a little better or to replace a broken part, they can.

 

[Sleeper]

Found said 82cc kits. Sent another email to the parts guy and we will see if he can get them here. He deals a lot with shipping from other countries.

I don't know much about it yet. Going to have to read up on what it takes to get stuff from Australia and China to here.

It may end up costing more than it is worth... I hear it can cost hundreds to ship one saw, so two would be twice as much.

Maybe a partial 20 foot shipping container of them would offset the costs enough. If we are to get these 82cc copies, we will get plenty of spare cylinder kits as well... no point in doing only half the stuff in one shipment.