Any Chinese chainsaw and chinese parts discussion

[Czed]

I added some vitamin d and retuned.

 

[Simondo]

I added some vitamin d and retuned.View attachment 53585 View attachment 53586 View attachment 53587

You sure you have 70% aria of the exhaust port from those 2 holes ? You may lose some back pressure

 

[Czed]

If anyone mods these mufflers just go through the back with needle nose pliers and fold the metal as tight as possible while twisting then take a dremel with cutting wheel and cut it loose from inside the muffler.

 

[Czed]

Minimal cussing was involved and no blood was spilled.

 

[Czed]

You sure you have 70% aria of the exhaust port from those 2 holes ? You may lose some back pressure

I had to try it simon i had a can of expired milk lol i fixed the stock exhaust it flows much better and i didn't make it much louder works good.

 

[Simondo]

I had to try it simon i had a can of expired milk lol i fixed the stock exhaust it flows much better and i didn't make it much louder works good.

LOL ...looks more like a "Pigs Snout"

 

[Czed]

Not even doing this is as loud or annoying as an echo 590 600 620 with too much cut out of the exhaust lol

 

[Czed]

LOL ...looks more like a "Pigs Snout"

I've ran louder saws

 

[Czed]

Simon you ever run an xl12 homelite those suckers will rattle your teeth after a while lol

 

[Stump Shot]

Weight 17.24 pounds as ready to cut, 20 in b&c, fuel and oil.

 

[Czed]

Weight 17.24 pounds as ready to cut, 20 in b&c, fuel and oil.

View attachment 53599

View attachment 53600

My pretty neighbor didn't have a scale lol
When i get a scale I've got echo 490 590 stihl 290 261 028 husky 257 dolmar 115 to compare fully loaded.

 

[Simondo]

Simon you ever run an xl12 homelite those suckers will rattle your teeth after a while lol

You mean like this Dave ....Runs real well

 

[Czed]

Red97
Here's something interesting it's virtually identical to a cs600 piston i'll have to measure the pins these things are cake to work on.

 

[Czed]

I meant diameter not design can't find my dial caliper lol
Some people got 52cc and 55cc instead of the 58cc from a different source

 

[Czed]

You mean like this Dave ....Runs real well

View attachment 53601

Hey that's what made me the near deaf man i am today lol
Nice one simon i still use mine occasionally.

 

[Czed]

Reminds me of a 490 kinda.

 

[Simondo]

Hey that's what made me the near deaf man i am today lol
Nice one simon i still use mine occasionally.

The ear plugs go in and then i pull a cord ....noisy job most of my life to Dave so i got to keep whats left.
Put a few tanks through it on the stack last summer X cutting Ash ...strong runner but makes you realise how much things have moved on.

 

[Czed]

The ear plugs go in and then i pull a cord ....noisy job most of my life to Dave so i got to keep whats left.
Put a few tanks through it on the stack last summer X cutting Ash ...strong runner but makes you realise how much things have moved on.

You'd be suprised at how many i keep running those and the red super xls they are still a presence here.

 

[Czed]

LOL ...looks more like a "Pigs Snout"

That's my stealth model.

 

[Simondo]

You'd be suprised at how many i keep running those and the red super xls they are still a presence here.

They still are a tool that will get the firewood cut..you just need some anti vibe gloves and good hearing protection. Chain-brake ....well if you keep your wits about you !!