2018 Holiday Giving thread.

[Mkinslow]

I've got this stihl sharpening guide to put up. I've used it and it does what its supposed to, I'm just better with freehand filing. I'll pay shipping in the USA. Hopefully more stuff to come.

Sent from my SM-G892A using Tapatalk

 

[kfd518]

What does the top down angle go to i might be interested

 

[Philbert]

I've got this stihl sharpening guide to put up. I've used it and it does what its supposed to, I'm just better with freehand filing. I'll pay shipping in the USA. Hopefully more stuff to come.

Interested if @kfd518 does not take it.

Thanks.

Philbert

 

[Wood Doctor]

I'm giving two new chain loops to a friend with a Stihl 046 Mag. One for a 25" bar and the other for a 28" bar. He owns both bars. It's not big bucks but I have a feeling he will like that gift.

Both boxes will be wrapped as one. Heavy for its size, I wonder if he will be able to guess what is inside the package. Should be easy. Sometimes the best gifts are something that can really be used.

 

[Mkinslow]

What does the top down angle go to i might be interested

Hope this picture is clear enough

Sent from my SM-G892A using Tapatalk

 

[kfd518]

@Philbert you’re up. It Does the same angles as the fg3 was hoping it had more vertical rotation to it.

 

[Mkinslow]

@Philbert you’re up. It Does the same angles as the fg3 was hoping it had more vertical rotation to it.

It's up to you bud , but I'm pretty sure it goes past the marked degrees some.

Sent from my SM-G892A using Tapatalk

 

[Mkinslow]

I've got this stihl sharpening guide to put up. I've used it and it does what its supposed to, I'm just better with freehand filing. I'll pay shipping in the USA. Hopefully more stuff to come.

Sent from my SM-G892A using Tapatalk

File guide goes to @Philbert

Sent from my SM-G892A using Tapatalk

 

[kfd518]

I’ll pass thanks

Edit
Sorry thought I put that in a while back

 

[David Young]

Husky 570 jug
Small blemish under the transfer.

Someone must need this.

 

[brandonstclair20]

The following are up for grabs. Buyer pays shipping.
Stihl 026 crankshaft
Stihl 026 flywheel side case
Stihl 066 aftermarket flywheel
Stihl 066 aftermarket bearing set.


Sent from my iPhone using Tapatalk

 

[Clemsonfor]

Ok here is a SIB. (Echo cs451vl) Not really apart, just the recoil and covers for the carb.

I got this from a Co worker. It ran then, but was wonkey. I was pretty sure it was just the carb. I reinstalled the carb, but upon trying to restart it the rope broke, I pulled the recoil to try and rewind it, the spring came apart and I got pissed called it quits and walked away a few years ago. My so was small ag the time and I had almost no time to work on stuff. I am pretty sure it will run fine, I think I pulled the muffler for a peek back them but don't remember. I will if someone wants me too. I lost interest and moved on and just want to kick this one down the road to someone that wants to fool with it or the parts. All the parts should be there, i have the covers , air filter and screws. Just ask you cover shipping.View attachment 154950

Sent from my SM-G900V using Tapatalk

 

[KYsawman]

Hi all
I want to offer the XL 12 days of Christmas or whatever holiday doesn't offend you.
I have red ones, blue ones, auto oilers ,man oilers.
If you want an XL12 tell me what you are looking for,then i can match one of the saws with you,like a saw with good P and C or if you need one for a good tank ect.
Shipping is on you,but in Cannuk coin so it is on sale for you mericans 30 % off.
So Merry whatever dosn't offend you..
Festivus here we come

Pm sent.

 

[husqvarnaxpman]

Nwp 51.4 big bore 372 cylinder and piston. Came out of a great running saw with lots of compression. It has been ran for the last 8 years and has cut a lot of wood. Does show some wear.

 

[Philbert]

Banana Bars!

I was gifted several banana bars a while back, while looking for some suitable for display, and have more than I need for that purpose. Offering these to anyone willing to cover the shipping.







20" nominal; about 22-3/4" overall. About 2-1/2 pounds each.
Each could use some wire brushing or sanding, and a coat of paint. Bottom rails have a few nicks, but could be run, or used for period appropriate display.
Please see the application list for fit


*** MS028 hand guards still available (Post #14)
http://opeforum.com/threads/2018-holiday-giving-thread.14601/#post-766560

Philbert

 

[Derf]

Nwp 51.4 big bore 372 cylinder and piston. Came out of a great running saw with lots of compression. It has been ran for the last 8 years and has cut a lot of wood. Does show some wear.
View attachment 155320 View attachment 155322 View attachment 155323 View attachment 155324

I'm sending you a PM on this

 

[kfd518]

I have some OEM Stihl plug wire. This is the newer smooth jacket not the older crosshatched looking wire.

6’ total will split it however anyone claims it just pay the shipping.

 

[husqvarnaxpman]

372 cylinder heading to Derf

 

[drf256]

I have some OEM Stihl plug wire. This is the newer smooth jacket not the older crosshatched looking wire.

6’ total will split it however anyone claims it just pay the shipping.

I’d love it.

 

[kfd518]

I have some OEM Stihl plug wire. This is the newer smooth jacket not the older crosshatched looking wire.

6’ total will split it however anyone claims it just pay the shipping.

Claimed