064 hose. Thread evolved need bing carb replacement

[Gravedigger]

Working on a 064. The hose on I'm guessing is the tank vent has two screws in the hose. When I touched it the line cracked and sounded as if the tank was in a vacuum. It would not start .

Sent from my iPhone using Tapatalk

 

[Czed]

Working on a 064. The hose on I'm guessing is the tank vent has two screws in the hose. When I touched it the line cracked and sounded as if the tank was in a vacuum. It would not start .

Sent from my iPhone using Tapatalk

You could pay 7.00 at a stihl dealer.
Or like i have always done just screw the grub screws into fuel line and replace.
Stihls version of a tank vent works ok.

 

[Canadian farm boy]

When you put the grub screws into the new piece of hose don't spin them in. Just push them in. If you spin them in they will cut threads and your take vent likely won't work very well

 

[Gravedigger]

You could pay 7.00 at a stihl dealer.
Or like i have always done just screw the grub screws into fuel line and replace.
Stihls version of a tank vent works ok.

That is what I did. Just checking.

Sent from my iPhone using Tapatalk

 

[Gravedigger]

Still not getting fuel. Changed fuel filter, looks like time to rebuild the Bing carburetor.


Sent from my iPhone using Tapatalk

 

[BuckthornBonnie]

Got a kit?

 

[BuckthornBonnie]

You could pay 7.00 at a stihl dealer.
Or like i have always done just screw the grub screws into fuel line and replace.
Stihls version of a tank vent works ok.

I also use whatever line I have around and reuse the grub screws. Clean the screws before hand and it should work.

 

[Gravedigger]

Got a kit?

No are kits hard to find?

Any AM carbs recommend?

Saw has been sitting for a few years.


Sent from my iPhone using Tapatalk

 

[BuckthornBonnie]

No are they hard to find? Saw has been sitting for a few years.


Sent from my iPhone using Tapatalk

Yes, well.... kinda.

They're nla from Stihl up here. There are AM versions from CTS in Australia. I've used them before. The gaskets are perfect but I don't think I used all parts of the kit. The screen and needle can be from a Huztl Bing kit (ebay).

Foragefarmer put together a thread on FHC:http://firewoodhoardersclub.com/forums/threads/rebuilding-a-bing-49.17700/

Ill add that a few other kits on ebay don't work at all (one from Germany even).

 

[Gravedigger]

Any Good bing carb replacements recommended ? Zama, walboro , others?


Sent from my iPhone using Tapatalk

 

[BuckthornBonnie]

Sure, any of em. Walbro, maybe? I'd try cleaning the Bing first, tho.

 

[lwn9186]

I have used them from here. Greendadeoutdoor.com part # 18-1071

 

[Gravedigger]

Sure, any of em. Walbro, maybe? I'd try cleaning the Bing first, tho.

Which one ? It does not have a fuel compensator.

 

[BuckthornBonnie]

What AF housing do you have?

 

[BuckthornBonnie]

I have a WJ-41 from cgraham as a spare. Haven't fitted it up yet to one of mine. I remember seeing some odd tech note that certain carb box/ housings were meant for Bing carbs.

I don't think this is the case, tho.

 

[BuckthornBonnie]

http://thebakeliteradio.com/sawspares.com/Stihl 064 IPL.pdf

 

[BuckthornBonnie]

Wj-65 ?
Wj-10?

 

[Keith Gandy]

No are kits hard to find?

Any AM carbs recommend?

Saw has been sitting for a few years.


Sent from my iPhone using Tapatalk

WJ69 works well

 

[Keith Gandy]

Look at this on eBay http://www.ebay.com/itm/322024471423

 

[huskihl]

Id try and fix the Bing first. I think they were pretty good runners