chrissalas1
Well-Known OPE Member
Hi
I have on my bench a husqvarna 36 that came to me because had starting problem.I found the ignition coil cable was broken and had no spark.I repaired the cable so i started it.When moving the saw up and down goes off so i think it has an air leak.Removing the flywheel for preparing for pressure testing i found that the crankshaft goes in and out(not up and down).So i teared down whole chainsaw and i found that the bearings on the crankshaft goes in and out very very easy(very loose).I tried an aftermarket crankshaft and the same happens.The bearings i tried are 6201 c3.Should i try 6201 c2?
I have on my bench a husqvarna 36 that came to me because had starting problem.I found the ignition coil cable was broken and had no spark.I repaired the cable so i started it.When moving the saw up and down goes off so i think it has an air leak.Removing the flywheel for preparing for pressure testing i found that the crankshaft goes in and out(not up and down).So i teared down whole chainsaw and i found that the bearings on the crankshaft goes in and out very very easy(very loose).I tried an aftermarket crankshaft and the same happens.The bearings i tried are 6201 c3.Should i try 6201 c2?