Saw video thread

[JohnnyBlade]

I think I know that saw[/

Ruht row

That chains really cutting threw the air great lol.
I mean its so sharp there is litterally no resistence from earths atmosphere! Well done Brett!
You do!

Thank God its not stolen! LMAO! Wait its not hot is it chipper?

That muffler is so dang loud i cant hear the ole lady bi+€hin anymore! Thanks Mike, Brett and Frank

 

[Deets066]

Had the srcarr ported 2100 out today. Forgot the vid though.

 

[StuntCockWelder]

View attachment 162838

Had the srcarr ported 2100 out today. Forgot the vid though.

That is bad a$$

 

[Fruecrue]

View attachment 162838

Forgot the vid though.

WTF Deets.

 

[chipper1]

Ruht row


Thank God its not stolen! LMAO! Wait its not hot is it chipper?

That muffler is so dang loud i cant hear the ole lady bi+€hin anymore! Thanks Mike, Brett and Frank

That's funny, sounds like you can take the rakers down a bit lol.

 

[ferris]

View attachment 162838

Had the srcarr ported 2100 out today. Forgot the vid though.

I found a 088 and a 9010 on the pic
Also yours?

 

[Deets066]

I found a 088 and a 9010 on the pic
Also yours?

The 088 is mine, the solo 694 is not

 

[redlight066]

Ported and blinged out this saw Erich. He owns the tree service i work at two days a week. He wanted a go fast play saw

 

[redlight066]

Here's the 660 I just finished. Pics of the jug are in the cylinder artwork thread. @Deets066 You were spot on about the carb. I'm glad i didn't drill the jet. Saw really pulls. This vidja is with full skip. I think I'm going to run it again with full comp and get a better feel for how strong it really is. Very happy with how it turned out.

 

[Deets066]

Sounds like it holds good rpm with that bar.

 

[MG2186]

I think I know that saw

Muffler looks familiar too

 

[huskihl]

 

[RI Chevy]

Nice Kevin. Sounds crisp! [emoji106]

 

[redlight066]

Went up to the lot this morning and ran the 660 with a new LGX full comp chain on the same 36" bar STILL held the same RPM in the cut. This thing is a torque monster. I cant take credit for the recipe tho. I copied a "recipe" from a build Deets and Randy did a couple of years ago on "another site". I did take a video of it........ Somehow it refocused on the rock I had the phone propped up on. Never watched the video til I got home. Nice rock video with some fuzzy guy in the background running a saw tho.

 

[RI Chevy]

LOL. Cool!

 

[Fruecrue]

 

[Fruecrue]

 

[Fruecrue]

Sound like a bit of piston slap at idle?
She’s high mileage fo sho.

 

[RI Chevy]

I did some chain testing today. I used MOFO 261cm and a small stick of fresh red oak. Only piece I had for now. I made 4 cuts with each chain using same cutting technique with the 4th just to see how it self fed.

Stihl RSK 18" 3/8 .050 Round file

Oregon LGX 18" 3/8 .050 square ground

Oregon EXL 16" 3/8 .050 Round File

Oregon LGX 16" 3/8 .050 Square Filed

 

[Deets066]

Went up to the lot this morning and ran the 660 with a new LGX full comp chain on the same 36" bar STILL held the same RPM in the cut. This thing is a torque monster. I cant take credit for the recipe tho. I copied a "recipe" from a build Deets and Randy did a couple of years ago on "another site". I did take a video of it........ Somehow it refocused on the rock I had the phone propped up on. Never watched the video til I got home. Nice rock video with some fuzzy guy in the background running a saw tho.

Take full credit, you ported the saw.

If you were to give me a food recipe it doesn’t mean I could make it taste as good