Brewz
Free Range Human in a Tax Farm
- Local time
- 11:54 AM
- User ID
- 550
- Joined
- Jan 16, 2016
- Messages
- 4,217
- Reaction score
- 14,304
- Location
- Hunter Valley - Australia
Hey folks
I have a couple aftermarket cylinders here that I would like to do some work on but am unable to cut the squish band as it's plated.
I don't have a lathe and usually cut the band using an old piston with a piece of power hacksaw blade tapped into a slot in the top of the piston.
This works great on cylinders with no plating on the band but it won't take the plating out.
Does anyone have a way they have found to get the plating out?
I have a couple aftermarket cylinders here that I would like to do some work on but am unable to cut the squish band as it's plated.
I don't have a lathe and usually cut the band using an old piston with a piece of power hacksaw blade tapped into a slot in the top of the piston.
This works great on cylinders with no plating on the band but it won't take the plating out.
Does anyone have a way they have found to get the plating out?