kurtz
Super OPE Member
- Local time
- 7:43 PM
- User ID
- 14668
- Joined
- Nov 23, 2020
- Messages
- 131
- Reaction score
- 796
- Location
- Wausau,WI
I saw a little bit of talk on the new DGG-6 from thechainshark.com but I hadn’t seen any reviews on one. Eventually my curiosity got the best of me and I ordered one and have used it for about a dozen chains and it seems to work very well and very fast. There’s a few things to point out from setup and my first few chains.
I think I might have been missing some instructions on the tension system but regardless I don’t see how it would work well the way that it was shown in pictures and videos. I will be modifying it in the future.
After the first chain it was obvious that the wheel wasn’t center to the chain so I took the shaft apart that had the crank on it and was able to relocate one washer to center it up. I used a centering square for this and now it’s near perfect.
Otherwise this machine works very well and I’m happy to finally semi-automate setting my depth gauges.
I think I might have been missing some instructions on the tension system but regardless I don’t see how it would work well the way that it was shown in pictures and videos. I will be modifying it in the future.
After the first chain it was obvious that the wheel wasn’t center to the chain so I took the shaft apart that had the crank on it and was able to relocate one washer to center it up. I used a centering square for this and now it’s near perfect.
Otherwise this machine works very well and I’m happy to finally semi-automate setting my depth gauges.
Last edited: