Used Saws

[Mastermind]

 

[ucm931]

You're All Going To HELL !!!!!

Probably. If u get there first, have a beer waiting for me. I'll probably have a stupid story about how I got there.

 

[sawmikaze]

I call BS...there is NO WAY that saw was running with a Vice Grip welded to the case like that...
What kinda chitbuggery you pulling down there in TN ?

He just likes adding Variables, I'm tired of it.

 

[sawmikaze]

Done.

New jug and slug.

.040 outta the squish .030 offa the base.

New fuel line, vent line, gutted at the tank, Echo vent added. New 198 Walbro. 357XP filter base and filter.

Big fughin hole in the muffler.

Plus GFYs

View attachment 270700 View attachment 270701 View attachment 270702

I can here that muffler from hear.

 

[Deets066]

I hear they run one hellova pig roastin business down there.....

Fixt

 

[RI Chevy]

Wow. This thread is gettin so tek nickle. Let's by more saws for the shelf to look at.
But I'd cut a couple trees for the cause. I'd even use the Hooskie 262xp to add insult to injury. And test a couple bar and chain combos in the PROcess.

 

[tree monkey]

That’s one hell of a porting tool that stump shot got his hands on. I’m thinking you all are a bit jealous

 

[dall]

Wow. This thread is gettin so tek nickle. Let's by more saws for the shelf to look at.
But I'd cut a couple trees for the cause. I'd even use the Hooskie 262xp to add insult to injury. And test a couple bar and chain combos in the PROcess.

the New England speed wood that you say is so hawd?

 

[stihl_head1982]

Seems to me pig rental would be a far less complicated endeavor than working on dirty used saws. But hey, to each his own neighbor.

 

[sawmikaze]

That’s one hell of a porting tool that stump shot got his hands on. I’m thinking you all are a bit jealous

I see you don't come up for air too often anymore now that you're a re-born muff diver..

 

[TreeLife]

I see you don't come up for air too often anymore now that you're a re-born muff diver..

He would rather ride his motorcycle than hang with us. I dont really blame him

 

[sawmikaze]

He would rather ride his motorcycle than hang with us. I dont really blame him

He ain't ridin' that motorcycle, he's motor-boatin'.

Julian tripped and go his dick stuck in a mud puddle too...dumass.

 

[stihl_head1982]

He would rather ride his motorcycle than hang with us. I dont really blame him

Yea me either. Besides guys who mess with used saws are usually kinda greasy and all. At least till they wash up and stuff.
Besides, I'd rather be on a bike than messing with greasy guys working on saws too.

 

[TreeLife]

He ain't ridin' that motorcycle, he's motor-boatin'.

Julian tripped and go his dick stuck in a mud puddle too...dumass.

I said that purely out of jealousy, I miss my motorcycles.

 

[Egg Shooter]

Done.

New jug and slug.

.040 outta the squish .030 offa the base.

New fuel line, vent line, gutted at the tank, Echo vent added. New 198 Walbro. 357XP filter base and filter.

Big fughin hole in the muffler.

Plus GFYs

View attachment 270700 View attachment 270701 View attachment 270702

Nice air filter pics.

 

[Egg Shooter]

Probably. If u get there first, have a beer waiting for me. I'll probably have a stupid story about how I got there.

 

[markds2]

Randy @Mastermind I need a little help, I'm working on a 346xp and its a bit of a mixture between an OE and a NE, basically its a OE case, with and OE top end but I have a NE top cover, purge bulb and carby. I just can't see where to mount the purge bulb, the IPL shows a little screw, but I can't see what it screws into.... Excuse me using your photo, but I'm thinking this little bit circled here is where it goes? If that's the case, the OE cases don't have that piece of casting and I'm stuck with not using the bulb as there isn't anywhere to mount it.

 

[Mastermind]

Randy @Mastermind I need a little help, I'm working on a 346xp and its a bit of a mixture between an OE and a NE, basically its a OE case, with and OE top end but I have a NE top cover, purge bulb and carby. I just can't see where to mount the purge bulb, the IPL shows a little screw, but I can't see what it screws into.... Excuse me using your photo, but I'm thinking this little bit circled here is where it goes? If that's the case, the OE cases don't have that piece of casting and I'm stuck with not using the bulb as there isn't anywhere to mount it.
View attachment 272022

Yep. No place for it on the OE case Mark/Adam.

 

[markds2]

Yep. No place for it on the OE case Mark/Adam.

Adz @Kiwioilboiler Randy thinks we're twins....

 

[Mastermind]

Adz @Kiwioilboiler Randy thinks we're twins....

You mean there are two of yinz ????