PAST Upstate NY GTG 16'

[paragonbuilder]

That's my drf255 ms260 with a 16" bar and new out of the box .325 23rs chain.

That's right Mike, we through the .325 chain on at the end. We were running picco before that.

 

[hseII]

That's my drf255 ms260 with a 16" bar and new out of the box .325 23rs chain.

How does the 3/8"P compare to the .325"?

What's your opinion?

 

[Canadian farm boy]

That's right Mike, we through the .325 chain on at the end. We were running picco before that.

Yes we did.

Im really impressed and extremely happy with the saw. @drf255 did amazing things with the saw. He's a great guy. Very talented. Builds a mean ms260 too

Thanks Al. I couldn't be happier

 

[Canadian farm boy]

How does the 3/8"P compare to the .325"?

What's your opinion?

3/8 picco is awesome. The saw screams with it.
3/8 picco is a lot faster

The .325 is still great but it definitely takes a bit more torque to pull it.

The picco chain I had on the ms260 was square filed.
The .325 chain was new out of the box 23rs

 

[hseII]

The .325 is still great but it definitely takes a bit more torque to pull it.

The .325 chain was new out of the box 23rs

So is that on mine.

 

[Canadian farm boy]

So is that on mine.

The only time I had .325 on the 260 was near the end of the day. I think only Dan and myself ran it. When you ran the 260 it was wearing picco

 

[hseII]

The only time I had .325 on the 260 was near the end of the day. I think only Dan and myself ran it. When you ran the 260 it was wearing picco

Oh, I remember.

I was curious at the comparison between the same saw.

 

[Jon1212]

Oh, I remember.

I was curious at the comparison between the same saw.

Cousin, you should switch your big Stihl over to Picco.......then it'll have a fighting chance against that Dolmar............zing!

 

[paragonbuilder]

Oh, I remember.

I was curious at the comparison between the same saw.

.325 chain

Picco chain after the stock saw runs

Sent from my iPhone using Tapatalk

 

[mt.stalker]

Sent from my iPhone using Tapatalk

What's the "recipe" on this particular 350 ?

 

[paragonbuilder]

What's the "recipe" on this particular 350 ?

That is @wcorey and his saw. I'll send him a message.

 

[hseII]

Cousin, you should switch your big Stihl over to Picco.......then it'll have a fighting chance against that Dolmar............zing!

 

[Adirondackstihl]

I recognize that foto

 

[hseII]

Cousin, you should switch your big Stihl over to Picco.......then it'll have a fighting chance against that Dolmar............zing!

Challenge accepted.

LepraWierdo,

Do you have a spinner and breaker and a 14" 3003 bar?

How about the same pin sprocket that will mount on my 461?

 

[drf256]

Can't remember which saw this was...

Sent from my iPhone using Tapatalk

Look at the muffler.

It's CFB's 260

 

[paragonbuilder]

Look at the muffler.

It's CFB's 260

Yeah that's when we switched to .325 chain. It was slower.

 

[hseII]

Who's got the part numbers for 18" Stihl picco bars?

 

[Canadian farm boy]

Who's got the part numbers for 18" Stihl picco bars?

I can hook you up with the same bar and chain set up I had on the 260. 16" picco bar in a 3003 mount and 3 63ps chains plus a 7T small rim.
Stihl Canada sells a kit. I don't believe the kit is available in the US. PM me if your interested

 

[hseII]

Is that 0.43 or 0.050" picco?

Is there a such thing as an 18" Picco?

The kit is not.

Reason I ask is because my 200T runs Picco, and I'm going to match.

 

[Canadian farm boy]

63ps is .050. The bar I have I believe is the only 3003 mount picco bar Stihl sells but I could be wrong. You may be able to find a 18" cannon bar somewhere.