SELLING TRADE VF chains for trade thread

[junkman]

You know with a breaker and a spinner ,you can make those into the lengths you need

 

[dall]

http://www.ebay.com/itm/Rare-Vintag...148104?hash=item2a6e1ef188:g:nzsAAOSwawpXqRl1


this one?

 

[dall]

http://www.ebay.com/itm/Oregon-2454...061670?hash=item1eb608fea6:g:kbIAAOSwdzVXiOyi

or this one ?

 

[Mattyo]

I'm not tellinging... muhahah

if I win the spinner, I'll need a breaker, anyone want to trade a breaker for some chains?

 

[junkman]

I just hit the rivet heads with my bench grinder to break the chain ,you don't even really need a spinner ,can peen the tie strap pins down with a small hammer ,the spinner looks pretty though .

 

[Mattyo]

yeah, I know, I got dental drills... I can break anything, but a breaker would be more elegant.

I've used a ball peen hammer plenty. better to have a spinner

 

[Philbert]

Breaker also works on bar rivets.

Philbert

 

[jake wells]

what kind of screwed up mess did i read?? now im confused.

 

[Mattyo]

Hi jake....I can try straightening it out for you.

Btw....sorry to hear about your grandparent.... I'm 36 and I've had both sets of grandparents up until I was 34....and to lose them is hard. Take care

 

[Philbert]

I just hit the rivet heads with my bench grinder to break the chain . . ..

Breaker also works on bar rivets.

The breaker also lets me re-use tie straps. Not a big issue for some guys, but important if you need or are trying to match a certain size or type. Using a scrap drive link as a die (placed over the anvil), I can punch out the rivets from the used pre-set and use that as a tie strap as well.

Philbert

 

[Mattyo]

still available

updated, added a few more and i've made sure hit all of these w/ the grinder. again, rakers will need to be adjusted to suit.

baggy 5 and 15 have two chains per bag, the others are singles

1. Stihl 3/8 050 lo pro 56dl sharp non safety
2. Stihl 3/8 050 81dl full chisel non safety sharp
3. Stihl 3/8 050 60dl full chisel non safety sharp
4. Oregon 3/8 050 60dl semi chisel non safety sharp
*5. 78 DL 325 050 two chains, sharp, one is S/C non safety, the other is f/c safety *
6. Oregon 3/8 050 72V 64DL full chisel vanguard type raker sharp
7. Oregon 3/8 050 56dl low pro, safety s/c sharp
8. Husky 3/8 050 60dl semi chisel sharp non safety
9. Windsor 3/8 058 67dl full chisel sharp non safety
10. Oregon 3/8 050 84dl full chisel sharp non safety SKIP
11. ? 325 058 72dl f/c non safety, sharp
12. Oregon 3/8 050 70dl semi chisel, safety, sharp
13. Mucculoch? 3/8 058 61dl semi chisel sharp
14. SW brand 66dl 325 058 semi chisel, non safety, sharp
*15. CM # 91 chain 3/8 050 48dl low pro safety semi chisel sharp, and one chain of non safety, sharp, unbranded*
16. oregon 91 chain 3/8 050 62dl low pro semi chisel, skip chain, sharp
17. oregon 33 chain .325 058 78dl chisel, safety, sharp

this should be it for the random lot. 19 chains total. let me know what they are worth, prefer to trade the whole lot at once!