SOLD Three Husqvarnas- 394XP, 562XPW, 372XPW

[jacob j.]

Hey Guys-

I got three fully rebuilt Husqvarnas for sale. First up is a clean 394. This is a result of two project saws I got from members here. One project was the remains of a smashed saw with an excellent engine, and the other was the remains of a saw that lost the mains and seals. The top end is an "A" cylinder off the smashed saw with a great condition "A/B" piston and new Caber F-cast rings. The main bearings are new Nachi, and the seals are new OEM. Most of the fuel system is new, and the carburetor is the WJ-39. Gaskets are all new OEM. The muffler is a new Farmertec (with a new OEM heat shield). The wrap handle is new OEM from Bailey's. The clutch cover/chain brake is new OEM from a member's ebay store with a used brake handle.



https://pixxxels.org/

 

[paragonbuilder]

I'm gonna have to put you on ignore...


Sent from my iPhone using Tapatalk

 

[jacob j.]

Many of the small parts are new OEM as are the rubber buffers. The HD system is original OEM and the HD air filter is new OEM. The top cover and air filter cover are new OEM from a member on AS.

https://pixxxels.org/

https://pixxxels.org/

 

[jacob j.]

I'm gonna have to put you on ignore...

lol....

https://pixxxels.org/

 

[jacob j.]

Next up is a 562- I had this one listed a while back and had a buyer for it, but I dropped the ball due to a family issue. This one also got new main bearings, gaskets, seals, fuel system, and a variety of small parts (all OEM). The original piston and cylinder are in great shape and the ring is new OEM. It has the new OEM wrap handle kit from Bailey's. I've had this one out on tree jobs three times and it ran flawlessly.

https://pixxxels.org/

https://pixxxels.org/

 

[jacob j.]

https://pixxxels.org/

 

[jacob j.]

Third up is a 372XPW/375 75cc that I also had listed a while back and had a couple of interested guys with gun trades but the guns were in calibers that I wasn't interested in. This one is a frankensaw, with parts from three different projects- two came from members here and one came from ebay. It got new Nachi main bearings, new OEM seals and gaskets, and the top end is new OEM from Spike60. The crank is minty OEM and it has the black ignition module.

https://pixxxels.org/

https://pixxxels.org/

 

[jacob j.]

I think the brake handle is the only aftermarket part, and maybe the clutch drum. The muffler is new OEM. The carb is the HD-12b. The clutch cover is a new OEM "wide discharge" type.

https://pixxxels.org/

https://pixxxels.org/

 

[Warped5]

Top shelf builder and seller here, guys.

Buy with confidence.

 

[jacob j.]

All three saws have sat in my shop for a month or more after running and none of the three amazingly leaked any oil, which might be a first for me. I'm asking $600 delivered PHO for the 394, $575 delivered for the 372, and $550 delivered for the 562 (all in the continental US). I can trade for a larger caliber rifle or pistol, no 9mms. I have one member interested in the 562.

 

[jacob j.]

 

[Marshy]

PM in yo box.

 

[Greg Newman]

Where did you get the flip fuel and oil cap from?

 

[jacob j.]

Where did you get the flip fuel and oil cap from?

I got 'em from the Husqvarna shop where I used to work. The part number is: 522 62 00 03.

 

[old 040]

Nice saws JJ, and a great price on that 394........

 

[RIDE-RED 350r]

@XP_Slinger Look at that '94! Droooooll!!

 

[XP_Slinger]

Grrrrrrrrrr...grumble grumble

 

[Ladrhog]

pm sent

 

[jacob j.]

394 is SPF....

 

[dustinwilt68]

Thank goodness, that 394 was making me feel weak in the knees.