Stihl SH 85C Blower Carb

[toolmaker]

Can someone please tell me what carb I need for a Stihl 85C Blower, and best place to buy one?
I know it's a Zama Q1C, but I don't know the rest of the part number
Thanks!!

 

[Wonkydonkey]

After a quick look around. Your carb could be a c1q-s64 or 68 in which case the carb kit would be RB89 , but try and double check,
Unfortunately the zamma page don’t seen to list the carb kit
If you follow my link on the zamma page. You can change the carb type at the end to bring up the pdf diagram. (In capitals) but it just comes up with the generic c1q
Edit zamma page
http://www.zamacorp.com/tclist.html?cnum=C1Q-S68H

 

[Wonkydonkey]

I,ll add this here, I just looked up sh85c on diyspareparts and not the bg85

i see there are other carbs listed
https://www.diyspareparts.com/parts/stihl/diagrams/sh-85/0b98eebc-4795-4a25-b55e/

maybe you could work it out like I tried before

Al though I still think the same carb kit as I said above will fit as the other link says it’s compatible.
Edit.
You could also look at this site for info & reference
https://www.lsengineers.co.uk/set-of-carburetor-parts-stihl-part-no-4229-007-1060.html

 

[AVB]

OPPPS. I pulled the 86C IPL. Good catch. Sorry about the mis-info and I have deleted it.

For the Zama RB-89 try Oregon 49-288 or Stens 615-706.

The C1Q-S68H should be same as the older versions which shows the RB-99 kit. For this try Stens 615-221.

 

[Wonkydonkey]

I just had another look, I,m not sure about the difference in carb kits.
I guess you need to work out which carb you have
I found this link to zamma quick cross reference to carb kits though
https://www.carbtech21.com/v/vspfiles/downloadables/zama kit reference.pdf

 

[AVB]

The main difference between the RB-89 and RB-99 is the metering diaphragm and gasket.

RB-89

RB-99