Stihl 461 AM cylinder

[SixGun]

Who makes an AM 461 cylinder? I saw lil red barn has one on Ebay but I don't know the quality.
Hyway ?
Thanks

 

[Mastermind]

http://opeforum.com/threads/new-hyway-cylinder-kit-ms461.319/

 

[Mastermind]

If you wanna try it......let me know.

You gotta do a thread on it......and report back with updates from time to time....

Cool?

 

[SixGun]

Duh, I actually responded to that thread and forgot. I went on HL site but 461 didnt come up in the options.
How do I get one of those ?
Sure I can do a thread on it, it's for a customer so I dont know if I'll ever see the saw again for updates.
Thanks

 

[Mastermind]

Duh, I actually responded to that thread and forgot. I went on HL site but 461 didnt come up in the options.
How do I get one of those ?
Sure I can do a thread on it, it's for a customer so I dont know if I'll ever see the saw again for updates.
Thanks

Porting it?

 

[Gentleman]

Lil Red Barn sells pretty good quality kits. I believe he gets them form Taiwan.
We just received our MS461 and MS661 cylinders from Hyway. I'll have them online by the end of the day.

 

[Mastermind]

Lil Red Barn sells pretty good quality kits. I believe he gets them form Taiwan.
We just received our MS461 and MS661 cylinders from Hyway. I'll have them online by the end of the day.

Having seen those Hyway kits firsthand, I can say they are some of the best aftermarket cylinder kits I've seen yet.

 

[Gentleman]

Here is the 461:
http://www.hlsproparts.com/ProductDetails.asp?ProductCode=H30466

and the 661:
http://www.hlsproparts.com/ProductDetails.asp?ProductCode=H30661

 

[SixGun]

I've been very happy with the last 2 Hyway kits I did . I'll try to get it from HL when they are up.
Not porting this one.
The spark plug hole was so reemed out that a time sert slides right in.
Thanks for responce

 

[Mastermind]

I've been very happy with the last 2 Hyway kits I did . I'll try to get it from HL when they are up.
Not porting this one.
The spark plug hole was so reemed out that a time sert slides right in.
Thanks for responce

Send me your address.

I'll drop it in the mail. Remember......we need to see a build thread. We're thread hoes you know.

 

[SixGun]

I'll PM you my address ,
Hope the thread turns out somewhat cool, its hard to follow some of the great build threads on here.
Thanks

 

[angelo c]

@Mastermind ,
I'm interested in a 461 kit. Is it a direct swap for the OEM or is it an "oversize" . I'm in the middle of a 461 build and would not mind pulling the jugs a few times for comparison.


Ps I've had good luck it's hiWay kits,

 

[Mastermind]

@Mastermind ,
I'm interested in a 461 kit. Is it a direct swap for the OEM or is it an "oversize" . I'm in the middle of a 461 build and would not mind pulling the jugs a few times for comparison.


Ps I've had good luck it's hiWay kits,

Bruce has them on the HL Supply site now sir.

I just had one to review.....and I'm sending it on to SixGun for him to install and do a thread on.