Stihl 084 conversion to 880 Brake Flag

[jmester]

I was on the hunt for a Chain Brake handle for my 084 that was broken. Couple of members here said that an 880 handle would work. Here is how I did it.
Parts needed / what I used.
1124 792 9110 Hand Guard
3003 655 9200 Washer from a 460 rescue saw
1124 792 5500 bushing }
1124 792 5505 bushing} Both of the bushings go into the Brake handle on the recoil side.
9022 341 1080 screw m5-35

 

[jmester]

These are the 1124 part number bushings

 

[jmester]

This is the 3003 655 9200 Washer from a 460 rescue saw

 

[jmester]

Here it is assembled.

The other thin washer is part number 0000 958 0512 which should already be on your 084 from the factory.

 

[jmester]

 

[Mastermind]

That's cool. Thanks for sharing sir.

 

[BuckthornBonnie]

Nice post. Similar to the 660-064 conversion.