WANTED Square Ground

[Gary Courtney]

Never tried square grind. Anyone interested in selling a couple loops in 3/8-.050-72 drive links to Texarkana ?

 

[jacob j.]

@singinwoodwackr

 

[stihl livin]

@MG2186

 

[MG2186]

Factory square ground chain isn’t none too impressive. All I stock is semi skip, can drop ship anything else

 

[singinwoodwackr]

@singinwoodwackr

Sold the Simington

 

[chipper1]

@singinwoodwackr

What you trying to say lol.

 

[Bill G]

Never tried square grind. Anyone interested in selling a couple loops in 3/8-.050-72 drive links to Texarkana ?

What brand?

 

[Gary Courtney]

What brand?

I run Stihl chains.

 

[Bill G]

I am not sure I have any reels of Stihl square. I should have Oregon.

 

[davidwyby]

I can grind you some. As said, factory is a poor representation. I have some chains that size and I don't really use them. 20" is .325" and then I jump to 28, mostly 32".

Hmmm...I might even have some already ground.

 

[davidwyby]

How about 24”?

 

[Gary Courtney]

How about 24”?

If 84 drive links it will work. My bar is 25"! stihl measures bars a little different

 

[davidwyby]

If 84 drive links it will work. My bar is 25"! stihl measures bars a little different

Same same

28" is where it gets goofy

 

[Jusgunn3]

I only have 3/8 .063…

 

[AJ Delhomme]

I can grind you some. As said, factory is a poor representation. I have some chains that size and I don't really use them. 20" is .325" and then I jump to 28, mostly 32".

Hmmm...I might even have some already ground.

You say factory grind is poor???? Explain please. I just set up an old Simington 450 close to factory angles…. (Not trying to hijack thread just want to learn)

 

[jacob j.]

You say factory grind is poor???? Explain please. I just set up an old Simington 450 close to factory angles…. (Not trying to hijack thread just want to learn)

He's talking about as the chain comes off the roll new from the factory, not from someone using their Silvey or Simington to touch up a chain.

 

[davidwyby]

You say factory grind is poor???? Explain please. I just set up an old Simington 450 close to factory angles…. (Not trying to hijack thread just want to learn)

Corner is often off

Angles are ok, on the durable side