SOLD Sold

[Stackowood]

Pretty decent MS 660 project with full wrap handle. This saw came to me as shown, with a broken piston. It appears to have an aftermarket P/C and the piston cracked. Everything is there, it just needs a new piston, cyl, gaskets, and probably seals with a crankcase flush.

$225.00 plus freight from Oregon 97225. Figure 18-19 lbs and dimensions of 18/15/15. PayPal is fine but please add 3% if you do not want to use F&F (I need to net $225).

Please start a conversation if interested. Thanks!

 

[Stackowood]

More pics:

 

[Stackowood]

More pics:

 

[Stackowood]

Looking at the fuel and oil caps (old style), I think this saw is an 066 with a 660 top cover.

 

[Stevetheboatguy]

Just out of curiosity. What size are the jug bolts? Looks like a early short case 066 to me, but if it has the small bolts that should make it a 064? @jacob j. You have any input? That wrap is throwing me off as well.



Steven

 

[Stackowood]

The cylinder bolts are 6mm.

 

[jmester]

Short case 066 would have an oval white plastic plug right under the oil cap

 

[jmester]

I would also say 660 for the new style tank vent. My have had a new tank handle at some point.

 

[Stevetheboatguy]

Damn you guys are good


Steven

 

[Stackowood]

But no flippy caps.

Here is a close up pic of the case by the oil cap...

 

[huskihl]

All 066/660s had screw caps. It’s the only model that didn’t get flippys

 

[Stackowood]

Looking at my MS660 parts list from 2006, it does show the old style caps. So it appears to be a MS660 Magnum, but this series isn't my specialty.

 

[Stackowood]

All 066/660s had screw caps. It’s the only model that didn’t get flippys

Thank you, I'll go back to the pile of top handle saws now.

 

[ManiacalMark]

Have to go by the serial number to know for sure.

 

[huskihl]

Thank you, I'll go back to the pile of top handle saws now.

Seems like a nice saw. That’s about the only thing I’ve remembered for certain about this family of saws. So many variations and a few different case sizes/configurations

 

[Vinpie1]

Message sent. I am interested in this project

 

[K Mueller]

Looks like a decent project for someone. That’s a Madsens wrap handle